Spring selection for a BOV
Thread Starter
Drifting
Joined: Aug 2017
Posts: 1,929
Likes: 359
From: Dayton, OH
Spring selection for a BOV
I am looking for instructions on what spring(s) to use in a BOV. It is a TurboSmart Race Port. The chart looks like this;
I have Googled the question but am only finding instructions for setting a BOV that has a screw type adjustment.
Thanks!!!
I have Googled the question but am only finding instructions for setting a BOV that has a screw type adjustment.
Thanks!!!
Last edited by SteveJewels; Jun 2, 2021 at 12:41 PM.
Thread Starter
Drifting
Joined: Aug 2017
Posts: 1,929
Likes: 359
From: Dayton, OH
Follow up question please.
Under the pink spring the table says 4 InHg but on the left side the table says 0 - 4 InHg.
Does that mean when the pink spring is in the valve starts to open at 0 InHg and is fully open by 4 InHg of vacuum?
Under the pink spring the table says 4 InHg but on the left side the table says 0 - 4 InHg.
Does that mean when the pink spring is in the valve starts to open at 0 InHg and is fully open by 4 InHg of vacuum?
