TR6060 MM6 2.66 1st-4th gear set
#1
Drifting
Thread Starter
TR6060 MM6 2.66 1st-4th gear set
Hi there,
I have a 2.66 gear set from a 09 Z06 MM6 TR6060
Set includes the following parts that are in great shape.
1st, 2nd, 3rd gears
input shaft which is also 4th gear
output shaft
1-2 syncro
3-4 syncro
bearings and races still on input and counter shafts.
I would most definitely prefer to sell as a set if I can.
I have a 2.66 gear set from a 09 Z06 MM6 TR6060
Set includes the following parts that are in great shape.
1st, 2nd, 3rd gears
input shaft which is also 4th gear
output shaft
1-2 syncro
3-4 syncro
bearings and races still on input and counter shafts.
I would most definitely prefer to sell as a set if I can.
The following users liked this post:
Sébast19X (03-12-2016)
#2
Drifting
Thread Starter
Retail are as Follows along with Part numbers.
Input shaft 19255788 -> 170.00
Counter shaft 19259992 -> 520.00
3rd Gear 19259990 -> 130.00
2nd Gear 19256244 -> 120.00
1st Gear 19178686 -> 100.00
Syncros (2) 19259367 -> 340.00
I also have 2 of the bearings with races installed on the counter shaft as well as the 1 bearing and race on the input shaft.
Input shaft bearing 19180057 -> 55.00
Counter bearing 1 92261774 -> 40.00
Counter bearing 2 12523054 -> 15.00
Total retail (as per online dealer pricing) 1490.00 give or take
Knowing they are really tough to find especially all from one order and place I'd like 1000.00 firm for the set.
Thanks
James
Input shaft 19255788 -> 170.00
Counter shaft 19259992 -> 520.00
3rd Gear 19259990 -> 130.00
2nd Gear 19256244 -> 120.00
1st Gear 19178686 -> 100.00
Syncros (2) 19259367 -> 340.00
I also have 2 of the bearings with races installed on the counter shaft as well as the 1 bearing and race on the input shaft.
Input shaft bearing 19180057 -> 55.00
Counter bearing 1 92261774 -> 40.00
Counter bearing 2 12523054 -> 15.00
Total retail (as per online dealer pricing) 1490.00 give or take
Knowing they are really tough to find especially all from one order and place I'd like 1000.00 firm for the set.
Thanks
James
Last edited by rpmextra; 03-11-2016 at 11:00 PM.
The following users liked this post:
Sébast19X (03-12-2016)