Low Mileage LS7 Long block W/ Advance Induction Ported and Polished Heads
11-13-2016, 10:16 PM
#1
Cruising
Thread Starter
Member Since: Dec 2014
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Low Mileage LS7 Long block W/ Advance Induction Ported and Polished Heads
SOLD!!!!
Hey guys, Up for sale is my LS7 long block out of my 2006 z06 with 12,578 miles. At 9,000 miles I had a RPM B3 cam installed along with AI heads. The motor is still in the car currently and Located in West Chester, PA at Complete Street Performance if you would like to come by and hear it run. It made 630/522 on a dyno jet with the current MSD airforce intake. Cam and heads specs below along with a video of the car running.
**Dry Sump Not Included **
Looking for $9500 OBO with MSD intake or $9000 OBO with stock LS7 intake.
Heads:
Advanced Induction 280cc CNC'd Ported and Polished Heads W/CHE Precision Bronze LS Valve Guides
BTR Platinum Spring Kit with Chromoly Retainers
REV LS7 Stainless Steel Exhaust Valve
Trick-Flow 7/750 Pushrods
Cam Specs:
RPM Cam Package
Comp Cams RPM B-3 243/259 114LSA
Hey guys, Up for sale is my LS7 long block out of my 2006 z06 with 12,578 miles. At 9,000 miles I had a RPM B3 cam installed along with AI heads. The motor is still in the car currently and Located in West Chester, PA at Complete Street Performance if you would like to come by and hear it run. It made 630/522 on a dyno jet with the current MSD airforce intake. Cam and heads specs below along with a video of the car running.
**Dry Sump Not Included **
Looking for $9500 OBO with MSD intake or $9000 OBO with stock LS7 intake.
Heads:
Advanced Induction 280cc CNC'd Ported and Polished Heads W/CHE Precision Bronze LS Valve Guides
BTR Platinum Spring Kit with Chromoly Retainers
REV LS7 Stainless Steel Exhaust Valve
Trick-Flow 7/750 Pushrods
Cam Specs:
RPM Cam Package
Comp Cams RPM B-3 243/259 114LSA
Last edited by Oh6silverZoh6; 11-16-2016 at 10:39 PM.
11-13-2016, 10:22 PM
#2
Those are some solid numbers ! Glws ,if you decide to part motor out I would possibly be interested in the heads cam and intake package , can provide stock parts to make a complete longblock as well if needed and I'm not to far from you
11-14-2016, 02:37 PM
#4
Supporting Vendor
If anybody would like to come by or has questions about the engine feel free to reach out to us as well and we can be of help!
Complete Street Performance
890 Fern Hill Rd
West Chester, PA 19380
(570)25-2547
info@completestreetperformance.com
Complete Street Performance
890 Fern Hill Rd
West Chester, PA 19380
(570)25-2547
info@completestreetperformance.com
Last edited by Complete Street; 11-14-2016 at 02:37 PM.
11-15-2016, 06:41 PM
#7
Cruising
Thread Starter
Member Since: Dec 2014
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
It drives very well, and has very minimal surging. Much less than you'd expect out of a larger cam. Also, you can speak to complete street directly about the tune. Thanks