FS: 2009 LS7 HEADS / LG G7X3 CAM w/PUSHRODS
#1
2009 LS7 HEADS / LG G7X3 CAM w/PUSHRODS
i just had a full NA Build on my 2009 z06 at vengeance racing and have up for sale my stock LS7 heads. i don't know too much about these LS7 heads if the valve guides have been done or not, I bought the car with headers, cam, flex fuel, Pfadt coil overs etc, the previous owner did take great care of the car, but once again I don't have too much info in these heads. The heads do have upgraded dual valve springs in them (comp cams). Heads are stock. I aslo have a LG G7X3 cam with comp cams pushrods available as well. The car was purchased with this setup Cam setup already installed on it. Car drove great. Feel Free to ask any questions PICTURES WILL BE UP TODAY
I’m located in Atlanta, GA
HEADS ARE SOLD
$440 for the LG G7X3 cam w/ comp cams pushrods shipped
Last edited by 2rexy; 05-11-2019 at 11:26 AM.
#4
If you can somehow get more information on the heads I would be interested, i would want to know what was done to them exactly, what type of guides and if they replaced the exhaust valves and intake valves with anything aftermarket.
#5
The valves are all stock. I’m going to have to take these to a shop to get looked at. Overall I don’t really know if the guides have been done, but Im pretty sure they have. If you’re VERY serious about buying these I can take the heads to vengeance and they can look at it for me.
#13
Instructor
Did you find out if guides had been done? Do you know if the heads have been milled at all? I would be interested in them if they haven’t been milled much.