When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2020 Corvette of the Year Finalist (track prepared)
C6 of Year Winner (track prepared) 2019
Garage cleanup - lots of LS engine and drivetrain parts
All prices are plus shipping from 94513
2.56 differential - $300
Not pictured, from a 2008 Corvette with about 40K miles. It's sitting in storage so I can post a picture upon request.
New LS7 crank bolt - $5
Not pictured, new in the bag.
Eight LS7 titanium intake valves - sold
Six LS7 stock pistons and titanium rods
Not pictured, also in storage and I can provide pictures upon request. These all came from a motor that dropped a valve so four of them are in excellent condition and the other two have some minor cosmetic damage. The important part, the large ends of the rods, are unscathed. The pistons also have carbon deposits which will need to be cleaned unless you only just want to use the rods with different pistons.
$60 each for the four
$50 each for the two with cosmetic damage
Seven stainless steel exhaust valves - sold
2007 automatic shifter - $100
Brand new, does not include the shifter ****.
2007 LS7 stock cut crank, cut .020" - $300
Came out of a running motor and has already been cut .020" so it's ready to use as is.
Two stock LS7 cranks with minor cosmetic damage to the counterweights - $200 each
Not pictured, in storage so I can provide pictures upon request. These all came out of motors that dropped a valve so they have minor damage to the counterweights. The journals are all clean and they spinned cleanly in the block before removing them. I will guarantee that these will work as expected and will refund your money (including shipping) if you find any other issues with them beyond what I've described here.
ZR1 Dewitts Radiator - sold
Fluidampr LS2/LS3 SFI balancer - sold
K1 4" stroke crank - $400
Also removed from my race car after switching back to a dry sump setup. The engine had a spun bearing so it may need to be turned but it otherwise in great shape.
New set of six LS flywheel bolts - $15
Never used.
New LS front timing cover gasket - $18
Never used.
Used LS lifter trays - $4 each
Not pictured, used but in good condition. I have eight in total.
Low mileage LS motor mounts - $100 for the pair
Used but in very good condition.
New LS valley cover gasket - $30
Used LS2/LS3 rear cover - $30 (sold the front separately)
New box of LS2/LS3 head bolts - $20
Used LS2/LS3 oil pan with pickup tube - sold
Used LS2/LS3 pickup tube - $30
Partial set (14) of used LS2/LS3 7.4" Comp Cams pushrods - $50
You'll need to buy two more to complete the whole set.
New pair of Remflex LS2/LS3 exhaust manifold gaskets - $20
These are great if you have a manifold leak from your headers not sealing properly.
Used LS2/LS3 windage tray - sold
Brand new ARP LS7 rod bolts - sold
LS7 passenger side FRC - $20
Single used bare LS7 head - $400
Approximately 40K miles.
Used LS3/LS7 injectors - sold
New, unopened full set of Comp Cams 7164 LS7 pushrods - $80
New, unopened full set of Comp Cams 7980 LS7 pushrods - $80
PAC 1218 valve spring kit with springs, seats, shims, locks and titanium retainers - $200
Used for less than 500 miles, but is missing one spring,retainer and the locks which can easily be purchased separately. Only the springs and retainers are shown but it will come with everything listed above.
Full set of mint condition LS7 titanium rods - sold
Full set of Texas Speed 7.8" LS7 pushrods - $50
Used, with less than 500 miles.
Used LS7 windage tray - $20
Used LS2/LS3/LS7 valley cover - sold
Last edited by subfloor@centurytrans; 05-04-2019 at 06:27 PM.
01-18-2019, 06:23 PM
Garage cleanup - lots of LS engine and drivetrain parts
