Diagnostic advice needed!
Thread Starter
Instructor
Joined: Sep 2004
Posts: 131
Likes: 0
From: Northwest Ohio
Diagnostic advice needed!
I have a 2005 C6 M6 with the following engine/fuel performance modifications:
Motor:
Texas Speed 404 cid 10.8:1
Diamond Racing Pistons (forged)
Eagle Steel Crank (forged)
SCAT H beam rods (forged)
ETP 225 heads
Comp Cam XE-R (236/242)- .602/.610 lift -114 LSA
Morrel Lifters
Manley Push Rods
Cosmetic Head Gaskets
Fast Rails, full lines, dual hiflow Walbro 340 255lph intank
Katech C5R Timing Chain
Custom GMPP Valve Covers with -10 breathers
Moroso Oil Catch Can
Induction:
RMCR Supercharger System w/ Vortech JT trim headunit (9 psi of boost)
All custom piping with water/air intercooler system
Vortech water/air intercooler with Bosch pump
Vortech Mondo Bypass
Reichert Racing Pulley
ECS Methanol Injection System (Alky Injection)
Found it! Damn LT's!
Motor:
Texas Speed 404 cid 10.8:1
Diamond Racing Pistons (forged)
Eagle Steel Crank (forged)
SCAT H beam rods (forged)
ETP 225 heads
Comp Cam XE-R (236/242)- .602/.610 lift -114 LSA
Morrel Lifters
Manley Push Rods
Cosmetic Head Gaskets
Fast Rails, full lines, dual hiflow Walbro 340 255lph intank
Katech C5R Timing Chain
Custom GMPP Valve Covers with -10 breathers
Moroso Oil Catch Can
Induction:
RMCR Supercharger System w/ Vortech JT trim headunit (9 psi of boost)
All custom piping with water/air intercooler system
Vortech water/air intercooler with Bosch pump
Vortech Mondo Bypass
Reichert Racing Pulley
ECS Methanol Injection System (Alky Injection)
Found it! Damn LT's!
Last edited by BoostedToy; Jul 16, 2011 at 05:52 PM.
