Hptuners Lambda Setup
Thread Starter
Racer
Joined: Mar 2010
Posts: 317
Likes: 0
From: Kuwait Kuwait
Hptuners Lambda Setup
I'm having a hard time setting up lambda Error and commanded Lambda. Does anyone know how to set it ? I have followed Greg Banish DVD but nothing changed ones I plug in my VCM Both Lambda error and Commanded Lambda diapered says unsupported parameter!
Safety Car
Joined: Aug 2006
Posts: 4,347
Likes: 25
From: Apache Junction AZ
Thread Starter
Racer
Joined: Mar 2010
Posts: 317
Likes: 0
From: Kuwait Kuwait
Thank you so much
Thread Starter
Racer
Joined: Mar 2010
Posts: 317
Likes: 0
From: Kuwait Kuwait
Looooooooooooooooool The solution was PID 6001 Wasn't displayed in my Table ! If someone want to do Lambda setup here what you have to list '
1-AFR_Hi_Res = Pid 6001
2-Commanded Lambda =[PID.6001]/14.68
3-Lambda Error =[AUX.20121]/[USER.9004]
[PID.6001] is Air fuel Ratio Hi Resolution ,14.68 is your stoich , [AUX.20121] Is your Wideband ,and [USER.9004] is your Commanded Lambda
1-AFR_Hi_Res = Pid 6001
2-Commanded Lambda =[PID.6001]/14.68
3-Lambda Error =[AUX.20121]/[USER.9004]
[PID.6001] is Air fuel Ratio Hi Resolution ,14.68 is your stoich , [AUX.20121] Is your Wideband ,and [USER.9004] is your Commanded Lambda
Last edited by Nasser_q8; Jul 17, 2013 at 05:20 AM.
