Z06 H/C/I Diesels on shutdown
#1
Instructor
Thread Starter
Z06 H/C/I Diesels on shutdown
2007 Z06 with H/C/I. Mods are listed below. Anyone here experience dieseling when they shut the engine off? It diesels a bit before finally shutting down and I'm almost sure it can be changed in the tune.If I blip the throttle a little bit and hit off it shuts down much smoother. My tuner did a great job with all the rest of the tune, I just forgot to mention to him about the dieseling issue. Just looking for some feedback and possibly if anyone knows what needs adjustment to correct this. Thanks for any info
Advanced Induction 280cc Heads- Factory Valves- PAC .700 RPM springs
Livernois Stage 3 Cam- ( They wouldnt disclose cam specs-smh)
FAST Intake Manifold and Fuel rails
NW 102 TB
Halltech Intake
Kooks 2" Longtubes-non catted X-Pipe
Factory axle back and mufflers
NGK TR6 plugs
Elite Engineering full Catch can setup
610 WHP 530 WTQ-
Advanced Induction 280cc Heads- Factory Valves- PAC .700 RPM springs
Livernois Stage 3 Cam- ( They wouldnt disclose cam specs-smh)
FAST Intake Manifold and Fuel rails
NW 102 TB
Halltech Intake
Kooks 2" Longtubes-non catted X-Pipe
Factory axle back and mufflers
NGK TR6 plugs
Elite Engineering full Catch can setup
610 WHP 530 WTQ-
#3
Instructor
Thread Starter
Me and a buddy got it all sorted by enabling VE and MAF and playing with injector timing. took about 6 calibration pushes to get it dialed in. All good now!
Last edited by spartan8270; 07-31-2017 at 09:52 AM.