NW102 issue
Thread Starter
Burning Brakes
Joined: Feb 2007
Posts: 861
Likes: 49
From: Tampa, FL
NW102 issue
Anyone good with HP tuners or have had this issue?
I have a 09 Z06, heads, cam and installed a MSD intake with NW 102. Car was just tuned with no issues. Anytime I do any full throttle pulls and come to a stop I have no throttle. Almost like it puts the car in limp mode but no codes. I can push the gas pedal and little to nothing happens on the tach. I have to keep pushing the gas pedal just so it would reach maybe 2k rpm so the car could start rolling. Once the car gets moving it suddenly comes out of like a limp (comes to life) and then drives fine until the next stop. If I drive the car normal and never do anything full throttle I have no issues. It’s only after I do say highway pulls or full throttle action. I have my tune file and data logs of of this happening.
I have a 09 Z06, heads, cam and installed a MSD intake with NW 102. Car was just tuned with no issues. Anytime I do any full throttle pulls and come to a stop I have no throttle. Almost like it puts the car in limp mode but no codes. I can push the gas pedal and little to nothing happens on the tach. I have to keep pushing the gas pedal just so it would reach maybe 2k rpm so the car could start rolling. Once the car gets moving it suddenly comes out of like a limp (comes to life) and then drives fine until the next stop. If I drive the car normal and never do anything full throttle I have no issues. It’s only after I do say highway pulls or full throttle action. I have my tune file and data logs of of this happening.
Pro
Joined: Feb 2014
Posts: 714
Likes: 106
From: England
Anyone good with HP tuners or have had this issue?
I have a 09 Z06, heads, cam and installed a MSD intake with NW 102. Car was just tuned with no issues. Anytime I do any full throttle pulls and come to a stop I have no throttle. Almost like it puts the car in limp mode but no codes. I can push the gas pedal and little to nothing happens on the tach. I have to keep pushing the gas pedal just so it would reach maybe 2k rpm so the car could start rolling. Once the car gets moving it suddenly comes out of like a limp (comes to life) and then drives fine until the next stop. If I drive the car normal and never do anything full throttle I have no issues. It’s only after I do say highway pulls or full throttle action. I have my tune file and data logs of of this happening.
I have a 09 Z06, heads, cam and installed a MSD intake with NW 102. Car was just tuned with no issues. Anytime I do any full throttle pulls and come to a stop I have no throttle. Almost like it puts the car in limp mode but no codes. I can push the gas pedal and little to nothing happens on the tach. I have to keep pushing the gas pedal just so it would reach maybe 2k rpm so the car could start rolling. Once the car gets moving it suddenly comes out of like a limp (comes to life) and then drives fine until the next stop. If I drive the car normal and never do anything full throttle I have no issues. It’s only after I do say highway pulls or full throttle action. I have my tune file and data logs of of this happening.
Le Mans Master
Joined: Jul 2010
Posts: 6,021
Likes: 727
Anyone good with HP tuners or have had this issue?
I have a 09 Z06, heads, cam and installed a MSD intake with NW 102. Car was just tuned with no issues. Anytime I do any full throttle pulls and come to a stop I have no throttle. Almost like it puts the car in limp mode but no codes. I can push the gas pedal and little to nothing happens on the tach. I have to keep pushing the gas pedal just so it would reach maybe 2k rpm so the car could start rolling. Once the car gets moving it suddenly comes out of like a limp (comes to life) and then drives fine until the next stop. If I drive the car normal and never do anything full throttle I have no issues. It’s only after I do say highway pulls or full throttle action. I have my tune file and data logs of of this happening.
I have a 09 Z06, heads, cam and installed a MSD intake with NW 102. Car was just tuned with no issues. Anytime I do any full throttle pulls and come to a stop I have no throttle. Almost like it puts the car in limp mode but no codes. I can push the gas pedal and little to nothing happens on the tach. I have to keep pushing the gas pedal just so it would reach maybe 2k rpm so the car could start rolling. Once the car gets moving it suddenly comes out of like a limp (comes to life) and then drives fine until the next stop. If I drive the car normal and never do anything full throttle I have no issues. It’s only after I do say highway pulls or full throttle action. I have my tune file and data logs of of this happening.
