My Lowering Project
Thread Starter
Safety Car
Joined: Jul 2004
Posts: 4,002
Likes: 1
From: It's warm in Fla!
CI 6-7-8-9-10-12 Veteran
St. Jude Donor '11
My Lowering Project
Started last weekend to lower my C6 with the bolts from WCC. Thought I would post some pictures of what it looks like from underneath the car for those that are thinking of doing this. I don't have any pictures of the car from the side yet as I'm not sure if I'm going any lower or not. I"ll post those when I know I'm done. The rear I lowered 1 inch and the front I lowered 1/2 inch by leaving the stock bolts on the front and going as low as possible. The first photo shows I removed the sway bar mounting bolts
The original bolts(on the left) next to the ones from WCC
The original bolts(on the left) next to the ones from WCC
