Calloway HONKER Install Question
Thread Starter
Drifting
Joined: Nov 1999
Posts: 1,920
Likes: 84
From: Roanoke Virginia
Calloway HONKER Install Question
Just received my Calloway Honker and noticed that there appear to be rivets for securing the unit to the shroud. Anyone know what where one can obtain the rivet gun? Has anyone used bolts instead of the rivets to secure?
Race Director
Joined: Jan 2005
Posts: 10,924
Likes: 854
From: Daytona Beach FL
Originally Posted by Dakota Slim
Just received my Calloway Honker and noticed that there appear to be rivets for securing the unit to the shroud. Anyone know what where one can obtain the rivet gun? Has anyone used bolts instead of the rivets to secure?
Pop Rivet Tool
Bob
Last edited by BEZ06; Jun 1, 2005 at 06:43 PM.
Team Owner
Joined: May 2001
Posts: 36,164
Likes: 2,511
From: ...tearing up the highways, one state at a time™®©
Originally Posted by beezeye
They're simple to use pop rivets. Get the pop rivet tool at Lowe's/Home Depot/Ace/etc. for about 7 or 8 bux. Here's a link to one:
Pop Rivet Tool
Bob
Pop Rivet Tool
Bob
This is true - simple to use and just buy a "disposable rivet gun" if you don't think you will have any further need
Screws or bolts I am told, would protrude and not work well at all - be patient, everything is listed on the directions sheet
I hope this helps
