Dynatech headers???
Thread Starter
Safety Car
Joined: Oct 2001
Posts: 4,945
Likes: 0
From: Dallas/Valley Ranch TEXAS!!!
Dynatech headers???
Anyone know the pors or cons about the dynatech headers vs. other brands??? 21st Century Muscle Cars sells them and I need advice...
T.I.A.
Jeremy
Dallas Tx
T.I.A.
Jeremy
Dallas Tx
Drifting
Joined: May 2005
Posts: 1,254
Likes: 0
From: Ft. Liquordale Florida
All of the header/cat systems are pretty much similar. I would have went for the LG's, but GOD (and it seems ONLY GOD) knows when they're actually going to get them.
I have the Dynatechs, they are A-1 quality, installation was "reasonably" simple. The only minor issue I have is that they hand a little lower at the collector than the stock exhaust, and the passenger side collector seems to be about 1/2" lower than the drivers side at the connection to the cat.
One day I'm going to get off my dead *** and call Dynatech about this. Additionally, I had my headers ceramic coated to try and keep down the heat in the engine compartment & add some velocity (+ $210).
Rick
I have the Dynatechs, they are A-1 quality, installation was "reasonably" simple. The only minor issue I have is that they hand a little lower at the collector than the stock exhaust, and the passenger side collector seems to be about 1/2" lower than the drivers side at the connection to the cat.
One day I'm going to get off my dead *** and call Dynatech about this. Additionally, I had my headers ceramic coated to try and keep down the heat in the engine compartment & add some velocity (+ $210).
Rick
Burning Brakes
Joined: Aug 2004
Posts: 945
Likes: 0
From: Bloomingdale IL
I put the 1 7/8 Dynatech's on my C6 a few weeks ago. My friend has the LG's. Side by side we had them and the quality of the Dynatech's are hands down better. They were very easy to install. It took about 2 hours and we never did heders before. The instructions are perfect and the fit was perfect too. The sound was something to hear. Everythig lined up perfectly. I highly reccomend them especially 1 7/8 if you plan on any forced induction. 
