LS2 edit
Thread Starter
Racer
Joined: Oct 2005
Posts: 362
Likes: 0
From: Corona California
LS2 edit
Just thought I'd let everyone know about my experience today with A&A Corvettes. Had Charlie do the LS2 edit on my 05 Z51 A4 verti and it turned out very good. The first dyno run with the Callaway Honker installed ran at 334 rwhp and 344 ftp torque before Charlie started the down load. After he ajusted everything it pulled 356rwhp and 358ftp of torque. Needless to say the car runs and shifts amazing, the transmission almost feels like it's just begging you to drop the hammer. It no longer feels sluggish shifting and doesn't have the retarding timing issue's any longer. At 5500 rpm the difference in the 2 graft's was 31 hp because of the new tune. These guys were very friendly and I will use them again for the heads and cam mod's. It was worth the 105 mile drive, just wish I wouldn't have hit that flying piece of plywood on the way there that took out my grill and front bumper. 
Last edited by Z512GO; Mar 3, 2006 at 12:23 AM.
