Procharger start up issues when hot...
Thread Starter
Melting Slicks
Joined: Nov 2002
Posts: 2,289
Likes: 29
From: Pearland Tx
Procharger start up issues when hot...
Anyone having start up issues after installing
Procharger D1 @ 9lbs of boost
Headers
Cam
Vette is tuned right in and put down 615 to the rear wheels.
It will start right up when cold but after a quick run ,it will not start until it cools down. It will turn over but just won't fire off like maybe it has some type of fuel issue? I know it gets hot under the hood but do you think that it would get hot enough to vapor lock the fule lines and maybe cause this?
Any help or ideas that may help get this gremlin out of my way would be helpful. Thanks
Procharger D1 @ 9lbs of boost
Headers
Cam
Vette is tuned right in and put down 615 to the rear wheels.
It will start right up when cold but after a quick run ,it will not start until it cools down. It will turn over but just won't fire off like maybe it has some type of fuel issue? I know it gets hot under the hood but do you think that it would get hot enough to vapor lock the fule lines and maybe cause this?
Any help or ideas that may help get this gremlin out of my way would be helpful. Thanks
Le Mans Master
Joined: Oct 2005
Posts: 7,310
Likes: 469
From: Texas Where God intended me to be.
2023 Corvette of the Year Finalist - Unmodified
2022 C5 of the Year Winner - Unmodified
Cruise-In X Veteran
St. Jude Donor '08 thru '11,'22 thru '26
Call Jason over at MTI. They will know what is causing the problem
