New stereo is done pics inside....
Thread Starter
Pro
Joined: Aug 2005
Posts: 586
Likes: 0
From: Destin Florida
New stereo is done pics inside....
To start i did focal 3ways in the front and 2 way in the rear, as far as subs its two Treo ssx 12inch, 2400 watt rms amp running the subs and 800.4 on the focals. Theres still alittle bit to clean up on it but all in all its done.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Nov 2004
Posts: 2,176
Likes: 0
From: Orange, CT
Nice setup!!! 
I had a crazy, custom setup in my C6 last season and could also not fit my top with it in... I have since removed it and am designing a two sub setup utilizing the airspace created by the storage pockets in the corners of the hatch area, in order to allow clearence for the top at any time. I just got sick and tired of not being able to take it off on a whim.
The finished product will allow for either one, or two 10" subs. In my car I am aiming for a more stock looking setup, quite the opposite of what I had... I also plan on casting molds for anyone who may be interested. I will post pics as soon as it is completed.
Click my sig for pics of the old setup...
I had a crazy, custom setup in my C6 last season and could also not fit my top with it in... I have since removed it and am designing a two sub setup utilizing the airspace created by the storage pockets in the corners of the hatch area, in order to allow clearence for the top at any time. I just got sick and tired of not being able to take it off on a whim.
The finished product will allow for either one, or two 10" subs. In my car I am aiming for a more stock looking setup, quite the opposite of what I had... I also plan on casting molds for anyone who may be interested. I will post pics as soon as it is completed.
Click my sig for pics of the old setup...