I'm sure that this has been discussed but I need alittle help. I took her into the dealer monday morning for the following items: fog lamps leaking water in when car is washed, alignment, as I've heard factory no good or off , hood alignment, and the ride height checked. I haven't had time to get the manuals yet, so out of curiosity I measured from the ground to the wheel well lip and found a big difference at all 4 corners. Sunday I set all the tire pressures to 30 psi. Wednesday they called and said the car was ready. So they picked me up and they replaced the fog lamps because they said the lens were faulty, they told me the tire press. was to low [ I set them cold] they said there was nothing wrong with the ride height or the alignment. they said the alignment [drifting to the left] was caused by the tire press. being wrong. I let them know that i had just lowered it the day before. can anyone tell me where the ride height is measured from? I am going to be laid up for a few months after back surgery and trying to get these little things resolved before. sorry for this being so lenghty. By the way I spent about 7 hours and put Zaino on her and was very impressed with the deep shine and mirror finish. to bad dealer left her out now she's filthy. but the dealer did not treat me bad. 1 cool vet.