Lowering
Burning Brakes
Joined: Jun 2006
Posts: 1,034
Likes: 0
From: Enumclaw WA.
Originally Posted by doctunder
Forum vendor? If not, where to buy? $$$?
Race Director
Joined: Jan 2005
Posts: 10,924
Likes: 851
From: Daytona Beach FL
Originally Posted by BB C6
What is the best way to lower a C6?? Name of any kits or suppliers?
Lowering Thread #1
This thread discusses swapping out the rear bolts or cutting the bushings on the stock bolts in the rear to get it lower:
Lowering Thread #2
Have fun - it's an easy DIY project.
Bob
Drifting
Joined: Jun 2003
Posts: 1,874
Likes: 68
From: Rochester Hills Michigan
You can drop her about an inch with the stock bolts and 3/4 of an inch more by cutting the bushings. I cut my rears without removing the bolts by removing the bottom shock bolt and letting the control arm drop down enough to get a sawzall in to the bushing. I cut about 2/3 of the bushing off and lowered it a total of 1 1/2 inch in the rear and 1 inch in front by only backing off the stock bolts. Good Luck
