When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My car was recently in for the column lock recall and they did the quick fix on it. They installed the K-Harness K 2.195. It has been 3 weeks and the "Pull key wait 10-seconds" has shown up.
The column is locked with the key out and unlocks with the key in. I have researched this forum and looks like I should just go ahead and install the CLB myself.I know where to get one and I would like some advice as to the installation.
Are the instructions that come with the CLB good? Will I recognize the K harness when I remove the panel under the steering wheel? Is there anything I should be extra careful with? and thanks.