C6 Tech/Performance LS2, LS3, LS7, LS9 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Be careful with Earl's braided brake lines!!!

Thread Tools
 
Search this Thread
 
Old 12-10-2006, 09:43 AM
  #1  
Z-51 POWER
Instructor
Thread Starter
 
Z-51 POWER's Avatar
 
Member Since: May 2006
Location: Guaynabo, Puerto Rico
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
Default Be careful with Earl's braided brake lines!!!

Guys:
I had two sets of Earl's line installed in my C6, the problem is with the front ones...they were too short, the first set LG sent me another set, then moving the car in the shop...I had to turn the wheel all the way in and there the line broke of from the cuopling. These lines are to tight...LG responded fast and sent me a set of Stoptech, problem solved they were 2" longer in the front. Much better construction because they are Teflon coated, I was really lucky that they did not snap in the open road...I could of killed my self. Well thanks again to LG...their customer service is 100% +++.

Regards,
Manuel
[IMG][/IMG]
[IMG][/IMG]
Old 12-10-2006, 02:07 PM
  #2  
Miaugi
Le Mans Master
 
Miaugi's Avatar
 
Member Since: Dec 2002
Location: Montreal Qc
Posts: 7,588
Likes: 0
Received 4 Likes on 4 Posts

Default




Quick Reply: Be careful with Earl's braided brake lines!!!



All times are GMT -4. The time now is 02:04 AM.