Need Rim Advise.............again
Thread Starter
Pro
Joined: Feb 2006
Posts: 632
Likes: 0
From: KINGS PARK NY
Need Rim Advise.............again
I found someone to widen my rims, I just dont know how wide I can go ......I just don't have any idea about this stuff...
I have 10.5" rims now with a 58mm offsett . They stick out a little , but I have what looks like tons of room in the well.
I want to widen them as much as possable, without any problems, but I dont know what to tell the welder, I am clueless......... he just wants the specs, and he'll do the rest.
HELP!!
Thanks guys
-Dennis
I have 10.5" rims now with a 58mm offsett . They stick out a little , but I have what looks like tons of room in the well.
I want to widen them as much as possable, without any problems, but I dont know what to tell the welder, I am clueless......... he just wants the specs, and he'll do the rest.
HELP!!
Thanks guys
-Dennis
Thread Starter
Pro
Joined: Feb 2006
Posts: 632
Likes: 0
From: KINGS PARK NY
I hope I follow you, are you saying I change the offset??
What if the offset is left at the current 58mm, and I just widen to fill in the wells? Think I could go 12"???
Thanks again
-Dennis
Thread Starter
Pro
Joined: Feb 2006
Posts: 632
Likes: 0
From: KINGS PARK NY
Race Director
Joined: Mar 2005
Posts: 10,399
Likes: 26
From: Austin Texas
Dgatto;try the calculator on; http://1010tire.com/WheelOffsetCalculator.asp
Remember you have to clear the frame and/or suspension on the inside and the fender on the outside AND clear the calipers.
Remember you have to clear the frame and/or suspension on the inside and the fender on the outside AND clear the calipers.
