When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Like I said in my reply.....the vararam will not work. The only CAIs I know will work with the maggie is the Lingenfelter or the Callaway. I've had the Vararam....I would choose the Lingenfelter or Callaway over it anyday (the quality is much better).
Why can't you just listen to what forum members say in this thread like you did when you first chose your setup .. !?!?
I personally don't know whether the K&N will work with the maggie or not but even if it did, the difference in gains between all three systems will be very minimal..!
Are you isntalling/tuning your maggie in Kuwait!? Who's doing it for you!?
Like I said in my reply.....the vararam will not work. The only CAIs I know will work with the maggie is the Lingenfelter or the Callaway. I've had the Vararam....I would choose the Lingenfelter or Callaway over it anyday (the quality is much better).
Just a word of warning, the existing Honkers do not fit with the Magna Charger as the inlet is located further forward and to the driver's side in the engine compartment.
We are working on a Honker for Magna Charger equipped C6's, and should have parts in around four weeks. Using prototypes, with an otherwise stock LS2 engine, we've recorded gains of at least 20 rwhp. We'll have special pricing for people who have installed their superchargers recently.
Why can't you just listen to what forum members say in this thread like you did when you first chose your setup .. !?!?
I personally don't know whether the K&N will work with the maggie or not but even if it did, the difference in gains between all three systems will be very minimal..!
Are you isntalling/tuning your maggie in Kuwait!? Who's doing it for you!?
ana ra7 arakib elmagna bel Kuwait, bass badiz computer elvette 7ag America yesawoolah flash tune.
We are working on a Honker for Magna Charger equipped C6's, and should have parts in around four weeks. Using prototypes, with an otherwise stock LS2 engine, we've recorded gains of at least 20 rwhp. We'll have special pricing for people who have installed their superchargers recently.[/QUOTE]
I thought your Callaway Supercharged C6 Package came with the Honker. I looked at 2 of these cars and thought they both had the Honker on them (they were not the stock airboxes). What comes on these cars?
We are working on a Honker for Magna Charger equipped C6's, and should have parts in around four weeks. Using prototypes, with an otherwise stock LS2 engine, we've recorded gains of at least 20 rwhp. We'll have special pricing for people who have installed their superchargers recently.
Originally Posted by Bushong572
I thought your Callaway Supercharged C6 Package came with the Honker. I looked at 2 of these cars and thought they both had the Honker on them (they were not the stock airboxes). What comes on these cars?
Thanks
They weren't Honkers. Callaway SuperCharged C6 Corvettes and Magna Charger systems for C5 and C6 currently come with a Magnuson-designed intake. We're about four weeks away from having Honkers for C6's with Magna Chargers.
ana ra7 arakib elmagna bel Kuwait, bass badiz computer elvette 7ag America yesawoolah flash tune.
3arif 7abeeby inik bitrakba bil kuwait bs ily 7abbait a3arfa howa ism el garage ily beyrakib lik eyah.. O 3an may'6ou3 el computer, laish ma t5aly Ahmed Al-Jamri bil Kuwait ysaweah lak eyah tune..!? O etha ma yegdar, el Ba7rain wil tuners ily feeha ysheelounik be3younhum!!!
3arif 7abeeby inik bitrakba bil kuwait bs ily 7abbait a3arfa howa ism el garage ily beyrakib lik eyah.. O 3an may'6ou3 el computer, laish ma t5aly Ahmed Al-Jamri bil Kuwait ysaweah lak eyah tune..!? O etha ma yegdar, el Ba7rain wil tuners ily feeha ysheelounik be3younhum!!!
Oh, by the way... What hood are you going for..!?
7abeeb galbi walla adri walla matga9roon ma3ay :* elgarage esmah "Alkour" w 3ala salfat elcomputer baini w bainik ana ma2athmin ay a7ad bel Kuwait kellish.
refeeji 7a6 el corvette malah (2007/M6 - stock) 3ala dyno ma36eeh 420RWHP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! min ehni ana gilt khala9 mako ella adiz el computer barra =)
elhood ya enni afa9la aw enni ashtiri hood scoop 3araft? I will cut the factory hood and stick the hood scoop ((( sa2alt 3an elmagna charger hood 670 KD. wa9il li el Kuwait
7abeeb galbi walla adri walla matga9roon ma3ay :* elgarage esmah "Alkour" w 3ala salfat elcomputer baini w bainik ana ma2athmin ay a7ad bel Kuwait kellish.
refeeji 7a6 el corvette malah (2007/M6 - stock) 3ala dyno ma36eeh 420RWHP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! min ehni ana gilt khala9 mako ella adiz el computer barra =)
elhood ya enni afa9la aw enni ashtiri hood scoop 3araft? I will cut the factory hood and stick the hood scoop ((( sa2alt 3an elmagna charger hood 670 KD. wa9il li el Kuwait
Look into the MCM supercharger hood.. You might be interested..! Look up Motor City Mold Company and check it out, that's what I'm getting for mine although I don't have any firm plans on getting the car supercharged yet..! 420 RWHP stock..!?!? That doesn't make sense for a stock non-z06 c6..
Look into the MCM supercharger hood.. You might be interested..! Look up Motor City Mold Company and check it out, that's what I'm getting for mine although I don't have any firm plans on getting the car supercharged yet..! 420 RWHP stock..!?!? That doesn't make sense for a stock non-z06 c6..
alah eywafek ya dashti eb mashro3ek
1) it's easy to install the maggie in any garage not like the procharger.
2) when you orderd it i told the shop (el nser) that u need a new hood and they told me he will cut the oem hood... don't do it contact me and i'll help you.
3) about the tune don't send your ECM or order a tune by mail cuz it will not give you the 100% of the power... you can tune it by ahmed el bahrainey.
xtacy187:
I was told that there are tuners in bahraine but there is no dyno shop then how he will tune his car without dyno and air/fule ratio meter.
and about the stock c6 that did 420rwhp i don't know anything about it !!
dashti please wich c6 did it and which shop ??? is it trt dyno, 4wd dyno or borla dyno ?
Dashti if you don't know me i'm the owner of the black c6 with body kit and airbrush paint ..... you can check the link: http://q8hp.com/corvette_32.htm
ra3i elcorvette loonah orange 2007 bass makint ma3ah yoom eldyno ohwa gali, w madri sima3t feeha ana min nass wayid ennah wa7id sawa flash tune 7ag el PCM malah ehni w 6agat makeentah ;/
ba3dain ta3al.. eshdarak enni ma5tha min elnisir el2abyath?
ra3i elcorvette loonah orange 2007 bass makint ma3ah yoom eldyno ohwa gali, w madri sima3t feeha ana min nass wayid ennah wa7id sawa flash tune 7ag el PCM malah ehni w 6agat makeentah ;/
ba3dain ta3al.. eshdarak enni ma5tha min elnisir el2abyath?
7beby ent kuwait is too small oo makow shay yen'7ash.
emwafag enshalah oo ay shay agdar asa3dek feh ana 7ather.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.