what do you think?
Thread Starter
Advanced
Joined: Jul 2006
Posts: 66
Likes: 0
From: Southern Pines NC
what do you think?
i just got my heads and cam installed and she dynoed at 460 rwhp and 402rwtq my mods are as follows: vararam induction, ported intake, trick flow heads 215, harland roller rockers, tsp torqer 2 cam ( 228 232 @595 ) dynatech lt, b&b bullets , 3.90 gears, underdrive pulley. next level performance said that this was one of the first runs and will continue to tune tomorrow. rwtq seems low and peak hp is ok, maybe the ported intake is choking it a bit and i need a FAST intake? or are the numbers right..........will keep you updated with tomorrows tuning
Melting Slicks
Joined: Jan 2007
Posts: 2,633
Likes: 2
From: Evans Colorado
sounds like a peaky setup.
With the torque showing significantly lower than the hp, it's peaking late in the rpm band. Hard to tell just from peak numbers though. Swiftness will come from power under the curve, not peak numbers.
With the torque showing significantly lower than the hp, it's peaking late in the rpm band. Hard to tell just from peak numbers though. Swiftness will come from power under the curve, not peak numbers.
Thread Starter
Advanced
Joined: Jul 2006
Posts: 66
Likes: 0
From: Southern Pines NC
thats true, i'll try to get a graph posted tomorrow or the next day..........well im in iraq so it might take a few days but i'll post it when i get it
Last edited by tucker0298; Mar 15, 2007 at 12:42 PM.
