12oh

Your thoughts on this pkg+pulley? heads will be stock, but milled to attain 63cc. stock bottem end & keeping stock converter/gears. have vararam,Lg's,no cats,bullets,160,tune. make 362/362- 12.49@113.5mph
this will be a street only car and will see the track once to see what i gained. want to see a trap of a minimum of 120mph.

other pkgs suggested:
Lpe gt-11/tsp stg 2 heads/ported ls2 intake(440/405 on a6)
TRcheatR/AFR205/fast90(450/420 on a m6) traps 123+mph
both of these cams are in the 215/230 range.

are the L92heads/L76intake comparable to the afr205/fast combo?

Red Sleeper

If I understand, you currently have a vararam, Lg's, no cats, bullets, 160deg therm and a tune and have run a 12.49 @ 113.5mph.

And, you are thinking about all the other stuff and want somebody to recommend a package.

I have been down this road before. Go with what has been tried and proven. What I'm saying is go with a complete package that has a HP guarantee.

12oh

all the pkgs i've mentioned have proven dyno sheets. just nobody wants to track there car and/or post track #'s.

anyone else have any thoughts on this pkg?

SpinMonster

You can run that cam with the heads milled that much? You have to mill?

12oh

?????

jbusmc1986

I am pretty sure that he meant that you will probably need to flycut your pistons if you go with milled heads and that cam

excessive81

these heads are being ported to flow better then ls7 heads....look around. ou will see. i am looking to build a complete forged setup for mine and looking ath the 6.2 block and these heads and intake. pretty sure with the stock setup no porting you looking at 50 hp from what i have seen. and at less then half the price of other heads....well i think you know where that is gping

12oh

like the review on the L92/L76 combo alot. just dont know what cam to go with on a stock converter a6-thinking of LPE gt-11 215/231
631''/644'' lift @118