Frame dimensions required
Thread Starter
Intermediate
Joined: Feb 2007
Posts: 38
Likes: 0
From: Melbourne Victoria
Frame dimensions required
I am after the underbody measurements for a C6 frame.
I have C5 and XLR underbody dimensional info but it is not correct for a C6. The C5 info shows all the holes in frame and their relationships to center axis and a datum line.
I have a C6 service manual but it only shows door opening and under hood dimensions.
Any help would be greatly appreciated and info on C6's is very scarce in Australia.
Cheers
Ross
I have C5 and XLR underbody dimensional info but it is not correct for a C6. The C5 info shows all the holes in frame and their relationships to center axis and a datum line.
I have a C6 service manual but it only shows door opening and under hood dimensions.
Any help would be greatly appreciated and info on C6's is very scarce in Australia.
Cheers
Ross
