HALLTECH KILLER BEE AAIS C6 Conversion Package

Reply Subscribe

Thread Tools

Search this Thread

Jun 19, 2007 | 04:10 PM

Halltech

Thread Starter

Supporting Vendor

Joined: Mar 2002

Posts: 13,099

Likes: 672

From: Bristol, Tennessee

St. Jude Donor '09

HALLTECH KILLER BEE AAIS C6 Conversion Package

We have four of these conversions out and about. Well worth the investment. This package allows the 05-2007 C6 to run the new Z06 Killer Bee™ AAIS and comes with the Halltech EMAILTUNE™ Package.

This is an email from our last customer:

"Since I have the second installation of your Killer Bee™ AAIS on a C6 I thought you might be interested in some test driving on the produce. I took a short ride this weekend with NO issues at all. Start in Tempe with a stop in Pine Arizona which is at about 5365 feet. The car had no issues climbing to this elevation with several long stretches of hill climb. From here we traveled to Show Low Arizona which is at 6347 feet. The car responded well with no issues. We headed back down to the Phoenix area with temperatures at 110 degrees. All in all we traveled about 300 miles going from 1000 feet to 7000 feet with temperature ranging from 70 degrees up to 110 and the car worked fine. My fuel average was about 27 MPG. If there were going to be problems or codes coming up I think I would have seen them! Hope this is of some help.

Thanks Jim. If you have any code update coming after the release of the 2008’s please let me know."

More:

http://www.corvettec5.com/store/?pag...ae2675c9cb237d

__________________

"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
423-915-6056

For service email:
orders@halltechsystems.com
www.halltechsystems.com

Jun 19, 2007 | 06:12 PM

lytmup

Burning Brakes

Joined: Jul 2005

Posts: 1,174

Likes: 1

From: NOVA VA

This page mentions two power figures... one place it states 12/11 HP/TQ and in another it mentions 20/20 HP/TQ.

DO you add those numbers or take the larger?

Thanks.

Jun 19, 2007 | 06:17 PM

Halltech

Thread Starter

Supporting Vendor

Joined: Mar 2002

Posts: 13,099

Likes: 672

From: Bristol, Tennessee

St. Jude Donor '09

Quote:

Originally Posted by lytmup

This page mentions two power figures... one place it states 12/11 HP/TQ and in another it mentions 20/20 HP/TQ.

DO you add those numbers or take the larger?

Thanks.

The Killer Bee AAIS is 12/11 on the Z06. Without tuning. Since the C6 conversion requires tuning anyway to convert the MAF code to the new sensor, we also performance tune the rest of the parameters. Thus the 20/20

Jim

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump