Mike Francoeur

Just seeing if anyone is interested

Cam Special -
Custom Grind Comp Cam
Comp Pushrods
Patriot Valve Springs
Gaskets
Underdrive Pulley
Fluids
Mobil 1 Oil

Tuning Included

$1995 Installed Including Tax!

Add Kooks Headers W/ Off Road X Pipe for:
$1450 Installed!

*Add $235 for Catted X Pipe

Add Ported LS2 Throttle Body & Intake for:
$500 Installed!



*All Prices are including tax and fluids. These are out the door prices for you guys


Please Call Mike F. for schedualing, cam selections, or anything else.
Feel free to email me as well...

Mike@1320hp.com
815-485-7741

r1man

If someone bought everything listed above, how much rwhp are we talking in a manual car?

Fore58

Very nice deal for us. Wish I was a closer to this shop.

Brasil

Are those dual valve springs? If so , up to what lift? Are they inferior to the Comp 921?

Mike Francoeur

I'd say they're equal to the comps. They're good for .650 lift. RWHP will depend on the size of the cam, but 420-450 is a good guestimate.

Nd4spd2

Mike - how long before we start seeing parts for the LS3?

Mike Francoeur

We wont know till we get to rip them apart unfortunately. We'll see how much different they are physically. The tuning software will be the biggest thing that we're waiting on right now. We all want to know

Mike Francoeur

Up to the top today, the dealers are getting the new LS3 vehicles in it seems like Don't let them be faster then you! Make them regret not buying an 05-07

Batman7

Hey Mike. I could not agree more. I know they will not be faster than mine.

Nd4spd2

Do you want to start with mine? It is due in this week.

Mike Francoeur

Sounds good, what do you want to do? I hear the beta software is out for the 08 Shoot me a PM if you're serious!

Tuner@Straightline

We got the Beta Software yesterday...I've had many randitions of the beta software over the years (started with HPTuners v1.6), and for the most part they are without glitches. I've actually have seen more glitches with the publically released version (and that was only one time, 05 C5 with a 3.90:1 rear end, the HUD speedo didn't work, and that was sorted out very quickly once they were aware of the problem) than with the beta versions.

1BDRSK

Hey Mike...Greg 'Canada' here. Your pricing is way too tempting and with the exchange rate now, I'm fighting the urge for another road trip down to your shop. You guys did such a good job on my car I'm afraid to get anything else done because it runs so good. I get tons of compliments on the sound, especially at WOT. I've been tearing up some road coarses this summer and I'll probably have to get tires before September.
If anyone is thinking about getting work done...don't hesitate to have these guys do the work....friggin' amazing!
Greg

Mike Francoeur

Come on down Greg, we'll get ya all set up again - i have a nice little torque cam for you and that road coarse Glad to hear that you're happy too, I was wondering if we were going to hear from you. We didnt know if you made it back without getting any blizzards

1BDRSK

Almost didn't....hit black ice just as I hit Michigan and after 1.5 hrs at 15mph trying to keep it out of the ditch I ended up spending a night in Pau Pau Michigan....talk about a white nuckle drive...but at least I wasn't one of the 20 cars in the ditch!

Mike Francoeur

Probably would've been the last time you came and seen us since its like biting the bullet on the weather Glad ya made it home and give me a call when you want to get that cam/heads or whatever you want to do done. We'll try to do a summer one this time huh?

Kerls07

pm sent I am ready

Mike Francoeur

I'll be calling ya in a minute!

mikes98vett

how much hp from just a cam?

Kerls07

Thanks mikey see you on the 28th
kerley