It's Christmas time! - LS7
Thread Starter
Racer
Joined: Jul 2006
Posts: 306
Likes: 1
From: Houston Texas
It's Christmas time! - LS7
Well, finally decided it was time to add a little more power to my C6. Thanks Gene for a good price on the block and thanks to Matt over at SDCC for crank, rods, etc. Can't wait to feel what she will do now!
Now just need to decide on a cam...
Now just need to decide on a cam...
Thread Starter
Racer
Joined: Jul 2006
Posts: 306
Likes: 1
From: Houston Texas
Pulled it out this weekend.
After alot of staring, I decided it was time to remove the low milege LS2 to make room for the 427. No four post needed, just jackstands. Removed from the top. =)
Callies DragonSlayer crank should be here next week along with the coated Wiseco pistons.
Still trying to decide on cam. Looking at Katech Torquer and Stage 3.
Callies DragonSlayer crank should be here next week along with the coated Wiseco pistons.
Still trying to decide on cam. Looking at Katech Torquer and Stage 3.
Race Director
Joined: Jun 2003
Posts: 14,051
Likes: 9
From: Houston TX
Oh I know why you pulled your motor... you were skeered I would kick your LS2 ****.. :P hehehe
No kidding.. this man is a Hot Rodding genius... so no doubt that the build will be second to none - but can you imagine pulling the trigger on your LS7 build just to spite your buddy
--- I am convinced JK's motivaiton was so my C5 Z06 would never get a chance to walk away from his C6 hehehe
No kidding.. this man is a Hot Rodding genius... so no doubt that the build will be second to none - but can you imagine pulling the trigger on your LS7 build just to spite your buddy
--- I am convinced JK's motivaiton was so my C5 Z06 would never get a chance to walk away from his C6 hehehe
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Jul 2006
Posts: 306
Likes: 1
From: Houston Texas
Oh I know why you pulled your motor... you were skeered I would kick your LS2 ****.. :P hehehe
No kidding.. this man is a Hot Rodding genius... so no doubt that the build will be second to none - but can you imagine pulling the trigger on your LS7 build just to spite your buddy --- I am convinced JK's motivaiton was so my C5 Z06 would never get a chance to walk away from his C6 hehehe
No kidding.. this man is a Hot Rodding genius... so no doubt that the build will be second to none - but can you imagine pulling the trigger on your LS7 build just to spite your buddy
--- I am convinced JK's motivaiton was so my C5 Z06 would never get a chance to walk away from his C6 heheheShould have went more cubes though... =)
Thread Starter
Racer
Joined: Jul 2006
Posts: 306
Likes: 1
From: Houston Texas
Well, finally starting to get a few more parts in.
Textralia OZ700 Z-Grip
Wiseco Pistons with PolyDyn coating and Callies Rods
Changed my mind on the cam again. Ordered the Katech Torquer cam kit. This thing should have alot of low-end grunt.
Textralia OZ700 Z-Grip
Wiseco Pistons with PolyDyn coating and Callies Rods
Changed my mind on the cam again. Ordered the Katech Torquer cam kit. This thing should have alot of low-end grunt.
Thread Starter
Racer
Joined: Jul 2006
Posts: 306
Likes: 1
From: Houston Texas