LS2 Tuner in Charlotte NC area
Thread Starter
Pro
Joined: Apr 2006
Posts: 628
Likes: 1
From: Charlotte area NC
LS2 Tuner in Charlotte NC area
I've put a LS2 in my 65 Coupe and I'm looking for someone who can tune the engine in the Charlotte area. If anyone has any reccomendations please let me know. 
Thanks Tim
Thanks Tim
Racer
Joined: Jul 2007
Posts: 276
Likes: 0
From: Lynchburg VA
St. Jude Donor '11
The email address is carolinaautomasters.com.
Good luck with your mods. What kind of HP gain are you looking for and do you have a prelimunary list of what you want to do? I'm doing a mild cam, pushrods and double springs by CAM, Kook's headers, X-Crossover, High flow cats to stock mufflers, Honker Cold Air Intake, Underdrive Pulley, and a Tune. We are expecting between 80-85 RWHP gain.
Thread Starter
Pro
Joined: Apr 2006
Posts: 628
Likes: 1
From: Charlotte area NC
Carolina Auto Masters seems to be the one, was hoping to find someone in Charlotte. I have an engine light on and know it is running rich. As it is not an emmission engine in this car, I do not have all the adjustments on a C6. The wire harness and ECU we got from Speartech out in AZ. Just have about 225 miles on it so far, getting it all together. Just want to make sure the engine is running OK and all this computer stuff is new to me. Thanks for the tip. Tim
Thread Starter
Pro
Joined: Apr 2006
Posts: 628
Likes: 1
From: Charlotte area NC
I'm getting ready to take my cars to Carolina Auto Masters in Durham, NC for some mods. as soon as my headers come in. Jeff Creech is the owner and has been very responsive to all my questions. He comes highly recommended by other members. He's just down the street from you! I do not believe you will find anybody specifically in Charlotte, NC. I've already looked. Jeff's shop is about a 2 hr. drive from my home in Lynchburg, VA.
The email address is carolinaautomasters.com.
Good luck with your mods. What kind of HP gain are you looking for and do you have a prelimunary list of what you want to do? I'm doing a mild cam, pushrods and double springs by CAM, Kook's headers, X-Crossover, High flow cats to stock mufflers, Honker Cold Air Intake, Underdrive Pulley, and a Tune. We are expecting between 80-85 RWHP gain.
The email address is carolinaautomasters.com.
Good luck with your mods. What kind of HP gain are you looking for and do you have a prelimunary list of what you want to do? I'm doing a mild cam, pushrods and double springs by CAM, Kook's headers, X-Crossover, High flow cats to stock mufflers, Honker Cold Air Intake, Underdrive Pulley, and a Tune. We are expecting between 80-85 RWHP gain.
Drifting
Joined: Sep 2004
Posts: 1,939
Likes: 0
From: North Carolina
I believe there is a tuner very close to Charlotte by the name of Nick Williams. I was given his name when I was looking to do some mods. I can't remember what the name of his shop is but I remember he was in the western part of the state. 
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Thread Starter
Pro
Joined: Apr 2006
Posts: 628
Likes: 1
From: Charlotte area NC
If you remember let me know, or post it. Thanks Tim
Thread Starter
Pro
Joined: Apr 2006
Posts: 628
Likes: 1
From: Charlotte area NC
Thread Starter
Pro
Joined: Apr 2006
Posts: 628
Likes: 1
From: Charlotte area NC
Racer
Joined: Jan 2006
Posts: 409
Likes: 1
From: Charlotte NC
If you don't feel like driving to Durham, try Williams Performance - Mooresville, NC, 704-658-2302. He's done LS1 and LS2 work for a couple friends and they rave about him.
Also Alvin Anderson of PCM for Less works near the speedway and he is a pretty good tuner. 704-307-4227. All he does is tune.
Jeff Creech of CAM in Durham is also a top flight tuner and engine builder. Awful nice guy and very honest.
Either Nick Williams or Jeff will be doing my cam and head work in the near future.
Also Alvin Anderson of PCM for Less works near the speedway and he is a pretty good tuner. 704-307-4227. All he does is tune.
Jeff Creech of CAM in Durham is also a top flight tuner and engine builder. Awful nice guy and very honest.
Either Nick Williams or Jeff will be doing my cam and head work in the near future.
Thread Starter
Pro
Joined: Apr 2006
Posts: 628
Likes: 1
From: Charlotte area NC
If you don't feel like driving to Durham, try Williams Performance - Mooresville, NC, 704-658-2302. He's done LS1 and LS2 work for a couple friends and they rave about him.
Also Alvin Anderson of PCM for Less works near the speedway and he is a pretty good tuner. 704-307-4227. All he does is tune.
Jeff Creech of CAM in Durham is also a top flight tuner and engine builder. Awful nice guy and very honest.
Either Nick Williams or Jeff will be doing my cam and head work in the near future.
Also Alvin Anderson of PCM for Less works near the speedway and he is a pretty good tuner. 704-307-4227. All he does is tune.
Jeff Creech of CAM in Durham is also a top flight tuner and engine builder. Awful nice guy and very honest.
Either Nick Williams or Jeff will be doing my cam and head work in the near future.
Thread Starter
Pro
Joined: Apr 2006
Posts: 628
Likes: 1
From: Charlotte area NC
Yes he is being highly reccomended by other CF members as well. It is about 60 miles from me, I might have to find a non highway route to get there. Still working out the bugs from the build. Thanks Tim
