06 C6 6Spd Dyno
Thread Starter
Pro
Joined: Jun 2005
Posts: 573
Likes: 7
From: Greensboro NC
06 C6 6Spd Dyno
I put my 06 Coupe Z51 6Sd on a Dyno Jet Model 224 yesterday for the first time. My only mods are a K&N Air Charger and the Diable Predator 93 Octane Tune. I didn't do a baseline prior to the mods but they must have helped some. Haven't been able to digitize the sheets yet; however was very happy with the results. I'll post the sheets later. My last two runs were very repeatable:
1. 359.31/354.58
2. 359.55/354.99
Max HP at 4500 rpm
Max Torque at 6000 rpm
Prevailing conditions 84 Degrees, 29.23 In-HG, Humidity 41%
Now for my next Mod!!
1. 359.31/354.58
2. 359.55/354.99
Max HP at 4500 rpm
Max Torque at 6000 rpm
Prevailing conditions 84 Degrees, 29.23 In-HG, Humidity 41%
Now for my next Mod!!
Pro
Joined: May 2000
Posts: 610
Likes: 1
From: Midland Texas
St. Jude Donor '09-'11
Numbers look fine to me. Your dyno shop may be able to give you your dyno files on a CD or e-mail them to you. Then you can go to the Dynojet website and get a free view program. Lots of fun to look at your own Dynojet files. You might want to try it.
Joe
Joe
