Header install, come on in!
Thread Starter
Team Owner
Joined: Mar 2005
Posts: 20,933
Likes: 905
From: salem OR
Header install, come on in!
So easy a Caveman could do it! Got that from Brandon at Maryland speed !The real purpose is talk about Header sizes. After taking off the stock exhaust and looking at the HUGH
ports of the Ls-3 and stock gasket to the motor. I about crapped
Thinking 1 3/4 is too small! So I mic'd the ports vs the Kooks 1 3/4
and indeed it is a 1/16 bigger! Looks like no restriction to me.
I was half hot till I measured them!
ports of the Ls-3 and stock gasket to the motor. I about crapped
Thinking 1 3/4 is too small! So I mic'd the ports vs the Kooks 1 3/4
and indeed it is a 1/16 bigger! Looks like no restriction to me.
I was half hot till I measured them!
