Z51 here with 4:10s and love it.
4:10 gears, typical install cost?
Thread Starter
Pro
Joined: Mar 2007
Posts: 514
Likes: 31
From: Corinth, TX
4:10 gears, typical install cost?
I have an 07 Z51 MZ6, and wat to go with the 4:10's. How does this work? Do they usually install a new ring/pinion in my housing, or exchange in a preset one? Do I need to watch out for a weaker 05 housing if prebuilt? Can I buy a housing, and install myself? I am in DFW if any recommendations. Thanks all!
Team Owner
Joined: Mar 2005
Posts: 20,933
Likes: 905
From: salem OR
I have an 07 Z51 MZ6, and wat to go with the 4:10's. How does this work? Do they usually install a new ring/pinion in my housing, or exchange in a preset one? Do I need to watch out for a weaker 05 housing if prebuilt? Can I buy a housing, and install myself? I am in DFW if any recommendations. Thanks all!
The install price i was quoted was 7 hrs labor plus all parts and fluids.
I 'm getting 3.73's and I will still be a little taller 9.9 vs. your 10.1 first
pretty good for first for you right there! Too low and you will lose speed.
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,225
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Your a bit far from us, but for a comparison, your gears would be $1,395 installed while you wait if you like.
ZO6's are $1,695 with programing, and A6's are $1,995 with programing.
Hope that helps.
ZO6's are $1,695 with programing, and A6's are $1,995 with programing.
Hope that helps.
Burning Brakes
Joined: Mar 2006
Posts: 906
Likes: 1
From: SF Bay CA
With a Z-51 You Don't want 4.10's IMO but it's your car!
The install price i was quoted was 7 hrs labor plus all parts and fluids.
I 'm getting 3.73's and I will still be a little taller 9.9 vs. your 10.1 first
pretty good for first for you right there! Too low and you will lose speed.
The install price i was quoted was 7 hrs labor plus all parts and fluids.
I 'm getting 3.73's and I will still be a little taller 9.9 vs. your 10.1 first
pretty good for first for you right there! Too low and you will lose speed.
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,225
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Drifting
Joined: Jun 2007
Posts: 1,757
Likes: 2
From: Middletown DE
Is that price parts and labor or just labor??? What gears do you typically install, GM Motive??? I've been kicking around the idea of getting 4.10's on my 07 Z51 for a while now. I had them on my F-Body and loved them.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Jul 2004
Posts: 24,652
Likes: 298
From: NJ
St. Jude Donor '05-'08
- $1395 for MN6 upgrade
- $1495 for A4 3.15 upgrade (includes shift programming)
- $1695 for A4 2.73 upgrade to 3.42s (includes new Z06 carrier and shift programming).
- $1995 for A6 upgrade (includes shift programming).
If you want the hardened output shaft that is an additional $295.00
Melting Slicks
Joined: Feb 2006
Posts: 2,007
Likes: 1
From: Eastern PA:ECS Paxton Novi 1500(676rwhp,585tq on stock engine),LG headers, 410's, Corsa Sports, ECS Alky Kit
St. Jude Donor '08-'09
With a Z-51 You Don't want 4.10's IMO but it's your car!
The install price i was quoted was 7 hrs labor plus all parts and fluids.
I 'm getting 3.73's and I will still be a little taller 9.9 vs. your 10.1 first
pretty good for first for you right there! Too low and you will lose speed.
The install price i was quoted was 7 hrs labor plus all parts and fluids.
I 'm getting 3.73's and I will still be a little taller 9.9 vs. your 10.1 first
pretty good for first for you right there! Too low and you will lose speed.
Racer
Joined: Aug 2006
Posts: 467
Likes: 1
From: LI New York
St. Jude Donor '08-'09
That is the price for Parts and Labor. We use Cyro treated Motive Gears.
If you want the hardened output shaft that is an additional $295.00
- $1395 for MN6 upgrade
- $1495 for A4 3.15 upgrade (includes shift programming)
- $1695 for A4 2.73 upgrade to 3.42s (includes new Z06 carrier and shift programming).
- $1995 for A6 upgrade (includes shift programming).
If you want the hardened output shaft that is an additional $295.00
How long does an install take
Thread Starter
Pro
Joined: Mar 2007
Posts: 514
Likes: 31
From: Corinth, TX
