Suggestions on LS3 Race headers
Thread Starter
3rd Gear
Joined: Oct 2007
Posts: 3
Likes: 0
Suggestions on LS3 Race headers
Hello,
I am new here and just kind of lurk at the mods for '08 LS3. I have one that I am putting in a 69 Chevelle. I was looking for suggestions on headers for the LS3 and this seems like the best source for actual proven data as many of the '08 Corvettes are circulating. I am not worried about smog because '74 and older in California don't have to have emissions test. My thoughts are Kooks 1-7/8" x 3".
I would also be curious if the Corvette headers hug the block better as compared to the F-Body Camaros. I ask because they don't make any for my model car. I suspect that I will have to modify some what but I think it would be better than having a custom set made. Thanks, Tom
I am new here and just kind of lurk at the mods for '08 LS3. I have one that I am putting in a 69 Chevelle. I was looking for suggestions on headers for the LS3 and this seems like the best source for actual proven data as many of the '08 Corvettes are circulating. I am not worried about smog because '74 and older in California don't have to have emissions test. My thoughts are Kooks 1-7/8" x 3".
I would also be curious if the Corvette headers hug the block better as compared to the F-Body Camaros. I ask because they don't make any for my model car. I suspect that I will have to modify some what but I think it would be better than having a custom set made. Thanks, Tom
Last edited by tom_a; Jul 17, 2009 at 11:20 AM.
Racer
Joined: Aug 2005
Posts: 458
Likes: 4
Tom call me in the am and I will give you some speeks to go by. Great biuld by the way. Mike Copeland GM performance Project manager uses our product for all his builds. He is doing a 69 chevelle with a ls7 right now for sema next year.
