When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was so shocked to see that '21' come up on the board Dennis but I really shouldn't have been, I still think there's even some 11.1s (or lower? ) in the car as well, and that trap speed DAMN!
Originally Posted by dennis50nj
nope but a lot of witnesses
Me being one of them. I really should've tried to get Bruce to tape the runs but he was kind of busy with his own car...I would've done it as well if I wasn't testing/tuning.
sure Spin this is how i would drive it. with your mods i would come off at 4500-5000 rpm i would look at the tach the whole time on launch ride the clutch so the rpm would never drop under 5000 rpm once going i would preload shifter while dead to the floor, never letting of the throttle, tap the corner of the clutch just enough to disengage first gear, sling shot to second, then side step and repeat. if the offer still stands sure i will drive it
thanks guys ill be trying again before the track closes. i heard today they wont be opening up until later this year for a longer concrete launching pad
I think some columnist from one of those Corvette magazines should do a write up on his achievments with the LS2 . Hopefully someone will take notice .
I think some columnist from one of those Corvette magazines should do a write up on his achievments with the LS2 . Hopefully someone will take notice .
but I'd like for them to wait just a few more weeks before they cover the story maybe, Dennis might not be done yet.
With any quality product (such as our beloved Corvette) there are always minor improvements/updates that are often performed even on excellent designs such as the VR. The beneficiary of that is of course the buyer of said products so it's refreshing to see that Vararam is staying on top of that.