Rotors and pads
Thread Starter
Burning Brakes
Joined: Mar 2002
Posts: 1,088
Likes: 3
From: Amherstburg Ontario
Rotors and pads
Wanting to buy Baer Eradispeed two piece Rotors for front and rear on my 98 C5. Street use only. What pads should I get and where is the best deal.
Thanks
Thanks
Race Director
Joined: Jan 2005
Posts: 10,924
Likes: 851
From: Daytona Beach FL
I've got the Baers on my '05 Coupe, and they're great!
I think the stock pads would be fine on the street. I put on Hawk HPS for street driving and liked them - low dust and no squealing.
Bob
.
I think the stock pads would be fine on the street. I put on Hawk HPS for street driving and liked them - low dust and no squealing.
Bob
.
Safety Car
Joined: Dec 2004
Posts: 4,276
Likes: 8
From: Tucson AZ
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
I have the eradispeeds ~ run stock pads and have experienced no problems ~ but have experienced great breaking! Some will claim they are noisy ~ an ocassional squeak, but no big deal IMO.
Pro
Joined: Feb 2008
Posts: 642
Likes: 1
From: San Jose
I've been using Porterfield R4Ss on the street for quite a few years. Even on my truck 
.
While you're in there you might also flush the brake system with Motul RBF600.
I did some 110-0 tests on a closed runway last weekend and got some pedal fade with the stock fluid.
.While you're in there you might also flush the brake system with Motul RBF600.
I did some 110-0 tests on a closed runway last weekend and got some pedal fade with the stock fluid.
