Pressure regulator???
Thread Starter
Instructor
Joined: May 2007
Posts: 119
Likes: 0
From: Indy Indiana
Pressure regulator???
Just finished my Pro Charger install on my 2005 C6. It was recommended that I secure the vac. line to the fuel pressure regulator with a zip tie. Where is the pressure regulator located? Thanks for your help...
Le Mans Master
Joined: Aug 2002
Posts: 8,472
Likes: 38
From: Houston TX
St. Jude Donor '11
The vacuum line from the blow off valve? That should go to anywhere that has manifold vacuum. The big hose from the back of the manifold to the brake booster is the current best approach. The Procharger kit should have come with a manifold to install there. see step 23 here: http://www.superchargers4less.com/C6/c6install.htm
The fuel pressure regulator is in the tank. Its a returnless system. There's no external regulator to tap into.
The fuel pressure regulator is in the tank. Its a returnless system. There's no external regulator to tap into.
Last edited by 5 Liter Eater; Mar 14, 2008 at 02:39 PM.
Thread Starter
Instructor
Joined: May 2007
Posts: 119
Likes: 0
From: Indy Indiana
Thank you! That's exactly what I needed to know. I got it up and running took it for a short ride with the base tune, but I still think it needs a dyno session to perform as it should. Thanks for the help!
