Line locks
Melting Slicks
Joined: Nov 2006
Posts: 2,865
Likes: 2
From: Dallas Tx
I just bought the Cartek one. So easy to install. Just unplug the old line and put this in place of it, then wire up the button. Looks like the stock line but has the selinoid placed into it. Great product.
Andrew
Andrew
Thread Starter
Pro
Joined: Jul 2007
Posts: 740
Likes: 0
From: Lynchburg VA
Pro
Joined: Feb 2007
Posts: 609
Likes: 2
From: Cranford NJ
We have our Cartek line lock kits in stock. Our kits are made specifically for the year of your car (not universal, so everything fits nice with a stock look under the hood). . All lines are pre bent, flared, and ready to bolt right into the original location…no customization required.
If you have any questions just give us a call.
Julian C Hormilla
(908) 317-4496
If you have any questions just give us a call.
Julian C Hormilla
(908) 317-4496
Racer
Joined: Sep 2007
Posts: 333
Likes: 27
From: East Coast
Line Lock
Stage IT:
This is a Cartek I installed, the only change I made was a remote relay so I wouldn't have to run wire and mount a switch.
http://forums.corvetteforum.com/show...02&postcount=6
This is a Cartek I installed, the only change I made was a remote relay so I wouldn't have to run wire and mount a switch.
http://forums.corvetteforum.com/show...02&postcount=6
Team Owner
Joined: Feb 2001
Posts: 27,254
Likes: 136
From: Short Hills, NJ
The Cartek line lock kit is the ONLY way to go. I've seen these things first hand, all custom made 'in house' so fit and quality are top notch, great pricing and fast shipping too. 
If I start to race my car more throughout the year I will be getting one installed by Cartek for sure.
If I start to race my car more throughout the year I will be getting one installed by Cartek for sure.
Thread Starter
Pro
Joined: Jul 2007
Posts: 740
Likes: 0
From: Lynchburg VA
Stage IT:
This is a Cartek I installed, the only change I made was a remote relay so I wouldn't have to run wire and mount a switch.
http://forums.corvetteforum.com/show...02&postcount=6
This is a Cartek I installed, the only change I made was a remote relay so I wouldn't have to run wire and mount a switch.
http://forums.corvetteforum.com/show...02&postcount=6
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Mar 2005
Posts: 11,549
Likes: 27
From: Southampton NJ
Stage IT:
This is a Cartek I installed, the only change I made was a remote relay so I wouldn't have to run wire and mount a switch.
http://forums.corvetteforum.com/show...02&postcount=6
This is a Cartek I installed, the only change I made was a remote relay so I wouldn't have to run wire and mount a switch.
http://forums.corvetteforum.com/show...02&postcount=6
what a great idea
Safety Car
Joined: May 2005
Posts: 3,990
Likes: 1
From: Corpus Christi Texas
Race Director
Joined: Jan 2006
Posts: 18,396
Likes: 169
I agree that those of us who choose to mod, do it knowing our warrantee's are in jeporady. But if a line lock is the only mod, for the purpose of racing, or just doing smoky burnouts, I think that some dealers would void his warranty on an otherwise stock car.
Safety Car
Joined: May 2005
Posts: 3,990
Likes: 1
From: Corpus Christi Texas
I agree, I think some certainly would.
Racer
Joined: Sep 2007
Posts: 333
Likes: 27
From: East Coast
Stage IT and dennis50nj:
Thanks, I've always tried for a clean, neat install in anything I do.
EuroRod:
Line Lock (or Roll Control as Hurst calls it) can be used for keeping your Vette from rolling at a traffic light if you aren't used to a clutch, especially if this is the owners first stick shift car. (Thats my story and I'm sticking to it)
Thanks, I've always tried for a clean, neat install in anything I do.
EuroRod:
Line Lock (or Roll Control as Hurst calls it) can be used for keeping your Vette from rolling at a traffic light if you aren't used to a clutch, especially if this is the owners first stick shift car. (Thats my story and I'm sticking to it)
Thread Starter
Pro
Joined: Jul 2007
Posts: 740
Likes: 0
From: Lynchburg VA
cartek line lock on the way and guys let me tell ya the cartek people are 100% customer friendly. i talked with them for probably 30 min about the car never once did he act like he was to busy for me and was a really cool guy and all i was doing was buy some line locks
. this kind of thing always impresses me when they treat ya just as good as someome buying a whole motor setup. Thanks anthony and julian.
cheers,
Josh from VA
. this kind of thing always impresses me when they treat ya just as good as someome buying a whole motor setup. Thanks anthony and julian.cheers,
Josh from VA
Last edited by Stage IT; Jun 2, 2008 at 09:59 PM.
Safety Car
Joined: Sep 2006
Posts: 3,922
Likes: 4
From: Cheektowaga NY
St. Jude Donor '08
cartek line lock on the way and guys let me tell ya the cartek people are 100% customer friendly. i talked with them for probably 30 min about the car never once did he act like he was to busy for me and was a really cool guy and all i was doing was buy some line locks . this kind of thing always impresses me when they treat ya just as good as someome buying a whole motor setup. Thanks anthoy and julian.
cheers,
Josh from VA
. this kind of thing always impresses me when they treat ya just as good as someome buying a whole motor setup. Thanks anthoy and julian.cheers,
Josh from VA
Pro
Joined: Feb 2007
Posts: 609
Likes: 2
From: Cranford NJ
cartek line lock on the way and guys let me tell ya the cartek people are 100% customer friendly. i talked with them for probably 30 min about the car never once did he act like he was to busy for me and was a really cool guy and all i was doing was buy some line locks . this kind of thing always impresses me when they treat ya just as good as someome buying a whole motor setup. Thanks anthoy and julian.
cheers,
Josh from VA
. this kind of thing always impresses me when they treat ya just as good as someome buying a whole motor setup. Thanks anthoy and julian.cheers,
Josh from VA
Julian C Hormilla
(908) 317-4496