Shifter Boot
Pro
Joined: Sep 2007
Posts: 743
Likes: 1
From: Papillion NE
I think this is correct. When I put in my MGW shifter and new console, I had to remove the boot mounting. I recall there's a rim that encircles the console shift hole from underneath the console. I remembered thinking that I'd need to take out the console if I ever decided to upgrade the boot.
There's lots of good "how to's" on removing the console. Just go slow...I'd also recommend doing some masking tape to protect edges and ashtrary cover.
There's lots of good "how to's" on removing the console. Just go slow...I'd also recommend doing some masking tape to protect edges and ashtrary cover.
