Oil Pressure Sensor Pin Out

Reply Subscribe

Thread Tools

Search this Thread

Jul 9, 2008 | 12:21 AM

JJ91284

Thread Starter

7th Gear

Joined: Feb 2007

Posts: 7

Likes: 0

Oil Pressure Sensor Pin Out

If anyone out there has the pin out for the oil pressure sensor (07 corvette) PN 12616646 that would be much appreciated. I'm installing the oil pressure sensor along with the harness connector (pn #88988301) and there are 3 wires that I don't know what to hook them up too. This oil pressure sending unit is going into my Pontiac Grand Prix GTP and replacing the stock idiot light. I have twin aeroforce interceptor gauges with my innovate LC1 wideband and hopefully oil pressure on the same gauge. While the other will be displaying my boost and knock retard.

Jul 9, 2008 | 12:32 AM

'VETTE PHASE

Melting Slicks

Joined: Aug 2006

Posts: 2,167

Likes: 11

From: Powell TN

Cruise-In VIII Veteran

Jul 9, 2008 | 12:48 AM

JJ91284

Thread Starter

7th Gear

Joined: Feb 2007

Posts: 7

Likes: 0

The harness I have looks different, my harness has 3 white wires and are shaped in a triangle layout.

Here is a link of the one I purchased

http://paceperformance.com/index.asp...&ProdID=130724

http://198.208.187.182/internet/View...tNumber=PT1825

Thanks

Jul 9, 2008 | 05:40 PM

'VETTE PHASE

Melting Slicks

Joined: Aug 2006

Posts: 2,167

Likes: 11

From: Powell TN

Cruise-In VIII Veteran

Quote:

Originally Posted by JJ91284

Ya know, it was late and I didn't even pay any attention when I posted it. What's worse, I just replaced the oil pressure sensor on my wifes '05 and its the same as what you pictured.

Jul 9, 2008 | 06:29 PM

JJ91284

Thread Starter

7th Gear

Joined: Feb 2007

Posts: 7

Likes: 0

Quote:

Originally Posted by 2000C-5

Ya know, it was late and I didn't even pay any attention when I posted it. What's worse, I just replaced the oil pressure sensor on my wifes '05 and its the same as what you pictured.

Thanks for trying, if you or anyone else knows, it would be greatly appreciated.

Jul 9, 2008 | 10:47 PM

JJ91284

Thread Starter

7th Gear

Joined: Feb 2007

Posts: 7

Likes: 0

For anyone needing this later on, this is probably it

http://www.aeroforcetech.com/files/O...essure_kit.pdf

Jul 9, 2008 | 11:26 PM

'VETTE PHASE

Melting Slicks

Joined: Aug 2006

Posts: 2,167

Likes: 11

From: Powell TN

Cruise-In VIII Veteran

For whatever reason, the pinout was wrong in my Service Information software, but I checked the Service Manual and it is correct in there. I see you already found it, sorry for the wait.