Slicks/DR's for C6
Thread Starter
Pro
Joined: Jan 2008
Posts: 573
Likes: 1
From: Ohio
Slicks/DR's for C6
I am looking for some insight into putting the 18" front C6 wheel on the rear and getting either DR's or MT ET Slicks. What size Mickey Thompson should i go with and also what size drag radial. I need a better 60' than a 2.0 
Thanks for the help.
Thanks for the help.
Melting Slicks
Joined: Jul 2007
Posts: 3,097
Likes: 5
From: Brentwood World's first A6 in the 9's (including N/A, blower, turbo and nitrous cars) 9.950@139.267 CA
If you don't mind going with a 17" rim on the back, my best 60ft so far was 1.569 a couple of weeks ago. That was with 275/40/17 Mickey Thompson ET Street Radials running 21psi at the time.
Tech Contributor
Joined: Jul 2002
Posts: 14,950
Likes: 264
From: St. Louis, MO
St. Jude Donor '08
Ahh you stalled automatic guys...
Most serious racers seem to use the M/T dr's. The Hoosiers are good too but they have no tread and so you really can't drive to the track on them. From what I read BFG's are also good and have better street life that M/T, Nittos are even better on street life but aren't as good on the track as BFG or M/T's.
