Ls1 injector o-ring
Thread Starter
Advanced
Joined: Oct 2007
Posts: 69
Likes: 1
From: Portsmouth United Kingdom (GB)
Ls1 injector o-ring
Any know the dimension of Ls1 injector o-ring, have gone to by them here in UK ,2 weeks delivery and £78 approx $130 ouch!
but can get them made a lot cheaper.thanks
but can get them made a lot cheaper.thanks
Drifting
Joined: Jul 2005
Posts: 1,969
Likes: 8
From: NJ
http://www.racetronix.com/product/EV6.jpg
See if this helps I'm pretty sure this is an LS1 injector
I can send you some if you want, but I imagine it will take a bit to get there. (Used to live in Newmarket... great place!)
See if this helps I'm pretty sure this is an LS1 injector
I can send you some if you want, but I imagine it will take a bit to get there. (Used to live in Newmarket... great place!)
Last edited by AintQik; Oct 9, 2008 at 11:12 AM.
Thread Starter
Advanced
Joined: Oct 2007
Posts: 69
Likes: 1
From: Portsmouth United Kingdom (GB)
[QUOTE=AintQik;1567401710]http://www.racetronix.com/product/EV6.jpg
See if this helps I'm pretty sure this is an LS1 injector
I can send you some if you want, but I imagine it will take a bit to get there. (Used to live in Newmarket... great place!)[/QU
A great help
7.52mm by 3.51mm these are 10 for a £1
at local engineering shop
(i am in Portsmouth,south coast)
See if this helps I'm pretty sure this is an LS1 injector
I can send you some if you want, but I imagine it will take a bit to get there. (Used to live in Newmarket... great place!)[/QU
A great help
7.52mm by 3.51mm these are 10 for a £1at local engineering shop
(i am in Portsmouth,south coast)
