Crane lifter question
Thread Starter
Pro
Joined: Oct 2005
Posts: 641
Likes: 0
From: Tampa Fl/Afghanistan
Crane lifter question
I am looking to buy a set of Crane lifters and have a question.
To the best of my knowledge, roller lifters are interchangeable between LS1, LS2, LS6, etc. But, while looking at the Crane website, they list a different lifter for 1997-98 LS1 engines and then a different for 1999 and up. (see below)
The reason I am asking is I have a lead on a set of the "older" style and want to use them in my LS2. And yes, I will contact the Crane tech line as well, but was wondering if anyone can shed light on this.
Part Number: 144530-16
Application CHEVROLET V-8 2000-UP, 5.7L LS1 AND VORTEC 4800, 5300, 6000 Description O.E. Design for 2000-up blocks originally equipped with hydraulic roller cam and lifters.
Part Number: 10530-16
Application CHEVROLET V-8 87-98, 305 AND 350 CU. IN. AND LS1 5.7L Description O.E. design for 87-98 blocks originally equipped with hydraulic roller cam and lifters.
To the best of my knowledge, roller lifters are interchangeable between LS1, LS2, LS6, etc. But, while looking at the Crane website, they list a different lifter for 1997-98 LS1 engines and then a different for 1999 and up. (see below)
The reason I am asking is I have a lead on a set of the "older" style and want to use them in my LS2. And yes, I will contact the Crane tech line as well, but was wondering if anyone can shed light on this.
Part Number: 144530-16
Application CHEVROLET V-8 2000-UP, 5.7L LS1 AND VORTEC 4800, 5300, 6000 Description O.E. Design for 2000-up blocks originally equipped with hydraulic roller cam and lifters.
Part Number: 10530-16
Application CHEVROLET V-8 87-98, 305 AND 350 CU. IN. AND LS1 5.7L Description O.E. design for 87-98 blocks originally equipped with hydraulic roller cam and lifters.
