Z06 exh manifold on C6 help needed
Thread Starter
Race Director
Joined: Sep 2007
Posts: 16,557
Likes: 2,104
From: Peoria/Phoenix AZ
C6 of Year Finalist (performance mods) 2019
Z06 exh manifold on C6 help needed
I've got the Z06 exhaust manifolds and cats installed on my LS3, but the wires for the O2 sensors are too short.
I thought I'd read somewhere that extensions were not needed. Did I do something wrong?
What is the fix? It's a daily driver, so I need to know quickly.
TIA
I thought I'd read somewhere that extensions were not needed. Did I do something wrong?
What is the fix? It's a daily driver, so I need to know quickly.
TIA
Advanced
Joined: Oct 2008
Posts: 57
Likes: 0
From: West Tn
You can also open up the harness and pull the O2 wires out back toward the rear of the engine ,drop them behind the manifolds and retape your harness.I had to unplug some of the injector wires for clearance to retape.
Thread Starter
Race Director
Joined: Sep 2007
Posts: 16,557
Likes: 2,104
From: Peoria/Phoenix AZ
C6 of Year Finalist (performance mods) 2019
Racer
Joined: Mar 2007
Posts: 379
Likes: 0
From: Quaker City Ohio
Did the same on my 05, pretty easy.
Thread Starter
Race Director
Joined: Sep 2007
Posts: 16,557
Likes: 2,104
From: Peoria/Phoenix AZ
C6 of Year Finalist (performance mods) 2019
Info sharing is an added benefit of Corvette ownership. 
I love this stuff. 
