Need Help
Thread Starter
6th Gear
Joined: Mar 2009
Posts: 6
Likes: 0
From: Spring Texas
Need Help
Hello; I have a C-6 "2005" Auto w/700r-4. I put into it a 3:43 rear end and it doesn’t have the correct programming for the transmission shifts! Is there someone who could point me in the right direction ---
Thanks Mike S...
Thanks Mike S...
Thread Starter
6th Gear
Joined: Mar 2009
Posts: 6
Likes: 0
From: Spring Texas
Thread Starter
6th Gear
Joined: Mar 2009
Posts: 6
Likes: 0
From: Spring Texas
Thank You Very Much; I'll try them -- hopefully thier near North Houston...
Former Vendor
Joined: Nov 2005
Posts: 11,792
Likes: 255
From: Ossining New York
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Keep me posted!
Chuck CoW
Thread Starter
6th Gear
Joined: Mar 2009
Posts: 6
Likes: 0
From: Spring Texas
Thanks I'll do that. My vette shifts hard (which is ok); however, it looses traction between all shifts -- witch is not good during a 1-2 through a turn and the down/up shift if passing on the freeway... Locally "North Houston" I've not been able to get it fixed.
Again, Thank You; I'll take any help I can get!
