RPM Tranny Diff SWAP !!





Real nice stuff and RPm was first class all the way and answering any questions ETC.
I swapped it out ' today at my Buddy's shop[ myself
Took me around 9 hrs.
I took my time and marked everything and torqued everything to a T.
Also use royal purple syncromax in the tranny and the royal purple gear oil in the diff.
I have a bunch of pics i need to get out of my phone and upload.
It was not bad i followed some of the other forum members instructions.
I did not drop the torque tube.
The hardest part was getting the pin out of the shift linkage between the torque tube read and the tranny.
and their getting it back in on the new one

All and all not bad
I was just glad to have free rein of my Buddy's tranny shop with all of his lifts and jacks
I can imagine doing it on the floor
Last edited by burtonbl103; May 18, 2009 at 08:09 PM.











I am close to 600 HP so i figured id be proactive and swap it before it grenades like some of the ones i see here on the forum.

and the 2005 was the weak diff year so now i have the 2006 and up with stonger and better intenals on both the diff and tranny
The Best of Corvette for Corvette Enthusiasts

I am close to 600 HP so i figured id be proactive and swap it before it grenades like some of the ones i see here on the forum.

and the 2005 was the weak diff year so now i have the 2006 and up with stonger and better intenals on both the diff and tranny

Thanks for the info
I am in the same boat as far as HP and just purchased a NX system, looking to give it a 150 shot, hoping for 550 or better at the wheel but a bit concerned about the diff and tranny
We will see










.jpg)
.jpg)
.jpg)
.jpg)
.jpg)





