Bare rotots
Thread Starter
Burning Brakes
Joined: Oct 2006
Posts: 752
Likes: 0
From: Lebanon CT.
Bare rotots
I am thinking about installing the Bare Eradi two piece rotors. Do you guys have any pictures and would also like your thoughts on their quality and performance. I don't track the car and are looking for a upgrade to the rear to fill in the gap between the rotor and the inside of the wheel. Thanks for your help as always.
Rod
Rod
Drifting
Joined: Sep 2007
Posts: 1,283
Likes: 7
From: Hurst (Fort Worth area) Texas
St. Jude Donor '09
Yep... Got 'em!
I special ordered the BAER EradiSpeed "Plus-2" rotors "slotted only" through Forum vendor Nate at Corvette Garage. Nate was very helpful and his service was first class.
Also, if you are into profound overkill (as I am!), Nate can facilitate the shipment of the BAER rotors directly to Cyrogenics International in Scottsdale, AZ (BAER is in Phoewnix) for the full "cyro" treatment.
They look super... and work just as good!
R
b
Also, if you are into profound overkill (as I am!), Nate can facilitate the shipment of the BAER rotors directly to Cyrogenics International in Scottsdale, AZ (BAER is in Phoewnix) for the full "cyro" treatment.
They look super... and work just as good!
R
b
Drifting
Joined: Sep 2007
Posts: 1,283
Likes: 7
From: Hurst (Fort Worth area) Texas
St. Jude Donor '09
Yes, and without any worry about pesky and persistent hairline surface cracks around "drilled holes" (or cast holes, as the case may be) . I really do like "the look"... the black powder coated calipers and the slotted [only] rotors combine for a no-bling functional look that at least looks good to these tired old eyes.
Last edited by RFP; Jul 22, 2009 at 05:21 PM.
Thread Starter
Burning Brakes
Joined: Oct 2006
Posts: 752
Likes: 0
From: Lebanon CT.
I special ordered the BAER EradiSpeed "Plus-2" rotors "slotted only" through Forum vendor Nate at Corvette Garage. Nate was very helpful and his service was first class.
Also, if you are into profound overkill (as I am!), Nate can facilitate the shipment of the BAER rotors directly to Cyrogenics International in Scottsdale, AZ (BAER is in Phoewnix) for the full "cyro" treatment.
They look super... and work just as good!
Rb
Also, if you are into profound overkill (as I am!), Nate can facilitate the shipment of the BAER rotors directly to Cyrogenics International in Scottsdale, AZ (BAER is in Phoewnix) for the full "cyro" treatment.
They look super... and work just as good!
R
b
Race Director
Joined: Oct 2007
Posts: 11,367
Likes: 211
From: Edgewood Washington
St. Jude Donor '11-'12-'13-'14-'15
Yes, and without any worry about pesky and persistent hairline surface cracks around "drilled holes" (or cast holes, as the case may be) . I really do like "the look"... the black powder coated calipers and the slotted [only] rotors combine for a no-bling functional look that at least looks good to these tired old eyes.
But your wheels definitely negate the "no bling" approach. Very nice.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski