simple splice thru the tail lights....
Thanks.
Trailer Wiring Question
Thread Starter
Racer
Joined: Jan 2005
Posts: 470
Likes: 9
From: Broken Arrow Oklahoma
Trailer Wiring Question
For those of you who have installed trailer hitches, can the trailer wiring just be spliced into the existing wiring or must one use some type of electronic adapter?
Race Director
Joined: Jan 2005
Posts: 10,924
Likes: 854
From: Daytona Beach FL
Take a look at this website and scroll down to about 4th link from the bottom for a great DIY guide:
http://www.netwelding.com/Reports_Vette_Info.htm
Bob : flag:
Drifting
Joined: Sep 2006
Posts: 1,489
Likes: 1
From: Livermore California
Very easy. Here's a vid of how to do it.
http://www.etrailer.com/tv-wiring-in...-corvette.aspx
Now if anyone has a cool way of keeping the connector from falling back into the rear fascia cavity when not in use I'm all ears!
FM
http://www.etrailer.com/tv-wiring-in...-corvette.aspx
Now if anyone has a cool way of keeping the connector from falling back into the rear fascia cavity when not in use I'm all ears!
FM
Race Director
Joined: Mar 2005
Posts: 10,399
Likes: 26
From: Austin Texas
Very easy. Here's a vid of how to do it.
http://www.etrailer.com/tv-wiring-in...-corvette.aspx
Now if anyone has a cool way of keeping the connector from falling back into the rear fascia cavity when not in use I'm all ears!
FM
http://www.etrailer.com/tv-wiring-in...-corvette.aspx
Now if anyone has a cool way of keeping the connector from falling back into the rear fascia cavity when not in use I'm all ears!
FM
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Jan 2005
Posts: 470
Likes: 9
From: Broken Arrow Oklahoma
Thanks for all the responses. The info was excellent. I knew how to wire a trailer but had heard that some recent production cars will have the electrical system blown by the extra load of trailer lights without using a special adapter. I did not know if the Vette fell into that category. Obviously it does not, which is great news. Once again, thanks to all the respondents.
Race Director
Joined: Mar 2005
Posts: 10,399
Likes: 26
From: Austin Texas
According to the companies that sell the wiring harness you "should" buy one of their relay boxes to make sure there is no problem.
An installer I know at UHaul said he wires them direct unless the customer is a jerk, if they are they pay for the relay and the additional labor charge.
An installer I know at UHaul said he wires them direct unless the customer is a jerk, if they are they pay for the relay and the additional labor charge.
Race Director
Joined: Mar 2005
Posts: 10,399
Likes: 26
From: Austin Texas
Yes, you have to drill holes. In both sides of the frame and in the bumper bar and you have to enlarge existing frame holes in order to install the carriage bolt plates.
