Matte Black 05'**Cammed**VIDEO
Thread Starter
Racer
Joined: Mar 2005
Posts: 470
Likes: 0
Matte Black 05'**Cammed**VIDEO
05' M6 Z51
Engine Mods:
Vortex Ram Air
Kooks 1 3/4"
Borla Stingers
Ported TB
Ported Fast 92
UD Pulley
Comp Cam 231/235
http://www.youtube.com/watch?v=To8Ag5iLj_I
Engine Mods:
Vortex Ram Air
Kooks 1 3/4"
Borla Stingers
Ported TB
Ported Fast 92
UD Pulley
Comp Cam 231/235
http://www.youtube.com/watch?v=To8Ag5iLj_I
Race Director
Joined: Oct 1999
Posts: 13,298
Likes: 14
From: Somers NY
Sounds great!
Have you had it to the track...if so what kind of # are you running?
I have almost the same set up, but with the stock cam.. I'd like to go to a similar cam as you have, & a 3600 converter...
Hoping to run mid 11's
Have you had it to the track...if so what kind of # are you running?
I have almost the same set up, but with the stock cam.. I'd like to go to a similar cam as you have, & a 3600 converter...
Hoping to run mid 11's
Thread Starter
Racer
Joined: Mar 2005
Posts: 470
Likes: 0
No I haven't had it to the track, kind of afraid how that 05' rear end would hold up.
Haven't done final dyno tune yet either, had a bad slave cylinder so it delayed the dyno tune, hope to get some dyne #'s posted this week.
Haven't done final dyno tune yet either, had a bad slave cylinder so it delayed the dyno tune, hope to get some dyne #'s posted this week.
Safety Car
Joined: Jan 2008
Posts: 4,711
Likes: 3
From: Middle of No where AK
As long as you dont get wheel hop you should be fine at the track. get it out there and see what it does. Worst case scenario you blow the rear end then you get to replace it with gears and a new case that is stronger. Sounds like you win twice there.
Burning Brakes
Joined: Jun 2008
Posts: 1,214
Likes: 3
From: CA
I'm in the process of installing a C5 rear in mines right now which is stronger. I busted by 05 rears with street tires so be vary careful. I only have boltons right now.
Racer
Joined: Apr 2006
Posts: 364
Likes: 0
From: Setauket New York
looks and sounds awesome! I think you should change up the wheels next.. Those painted stocks look kinda plain. I noticed your liscence plate frame says clearwater, FL. I live in clearwater as well. What part are you from?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Mar 2005
Posts: 470
Likes: 0
Thread Starter
Racer
Joined: Mar 2005
Posts: 470
Likes: 0
I'm going to paint those wheels glossy black and see how the gloss black matches the gloss black roof and side lights and taillights. Then, depending on how that looks, and after I burn through the run craps, I'm going to do a rear wide body conversion and get some 18X10's and 19X12's either gloss black or matte like the car.
Thread Starter
Racer
Joined: Mar 2005
Posts: 470
Likes: 0
Burning Brakes
Joined: Aug 2007
Posts: 962
Likes: 0
From: SPRING HILL FL
Nice sounding car! Mean looking color, I live in Spring Hill, Going to bradenton drag strip Sat. Nov 7. Trying to get a bunch of vettes to go. That would be a good time to run it. PM me of anyone interested...