C6 Corvette RaceMesh Grilles... from CCA
03-19-2010, 01:57 PM
#1
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
C6 Corvette RaceMesh Grilles... from CCA
RaceMesh Grilles
for your
C6 Corvette, Grand Sport, Z06 and ZR1
for your
C6 Corvette, Grand Sport, Z06 and ZR1
RaceMesh Grilles are now available for your
C6 Corvette. Please follow the link
below to order. Please note that RaceMesh
products are custom made and made to order.
Typical production time is 30 days.
C6 Corvette. Please follow the link
below to order. Please note that RaceMesh
products are custom made and made to order.
Typical production time is 30 days.
Peace
Chip
__________________
..................Click for
..................Click for
Last edited by CCA Corvette Parts; 11-07-2016 at 12:27 PM.
01-12-2011, 11:05 AM
#3
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
Here are some pictures Ed Buckley was kind enough to take and
forward to us. This is his 2010 GS with Electropolished Grand Sport RaceMesh
with 4 Chamber Lower Grille.
forward to us. This is his 2010 GS with Electropolished Grand Sport RaceMesh
with 4 Chamber Lower Grille.
Tks Ed, looks fantastic 
Peace
Chip
Last edited by CCA Corvette Parts; 01-12-2011 at 11:08 AM.
09-21-2011, 12:45 PM
#8
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
12-08-2011, 03:25 PM
#9
Racer
Member Since: Sep 2011
Location: Birmingham Michigan
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
I read from one thread here that I can't find at this moment but he stated that these RaceMesh grilles are more restrictive than the stock ones and cause air flow problems. I find that to be a totally ridiculous claim. I mean I could see a microscopic difference in air going in since the stock ones have huge open slots but come on, it can't cause airflow problems. Stunning grilles by the way. When I trade in for my Cyber Grey z0 I will be ordering the black chrome. I think that would look nice on that color. Keep up the good work!
12-08-2011, 05:13 PM
#10
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
I read from one thread here that I can't find at this moment but he stated that these RaceMesh grilles are more restrictive than the stock ones and cause air flow problems. I find that to be a totally ridiculous claim. I mean I could see a microscopic difference in air going in since the stock ones have huge open slots but come on, it can't cause airflow problems. Stunning grilles by the way. When I trade in for my Cyber Grey z0 I will be ordering the black chrome. I think that would look nice on that color. Keep up the good work!
Tks for the kind words
Look forward to seeing your order and good luck on the trade.
Peace
Chip
12-28-2011, 02:16 PM
#11
Burning Brakes
fog light grills?
Removed my fog lights for a cooler installation. Do you have any grills for those openings? I'll make my own eventually, unless I could buy some off the shelf.
08-17-2012, 06:53 PM
#14
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
All our current RaceMesh pricing can be found here
http://www.customcorvetteaccessories...randsport.html
Regards
Chip
09-27-2012, 01:54 PM
#15
If I had the 1 chamber style that zip ties to the stock grill, could I cut the stock grill out only leaving the perimeter so the race mesh could be removed to install/remove an oil cooler block off plate? It would make that job quicker than going thru the process of removing the stock grill everytime!
09-27-2012, 02:19 PM
#16
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
If I had the 1 chamber style that zip ties to the stock grill, could I cut the stock grill out only leaving the perimeter so the race mesh could be removed to install/remove an oil cooler block off plate? It would make that job quicker than going thru the process of removing the stock grill everytime!
You will need to leave enough to zip tie to, or drill holes in the surround.
Peace
Chip
06-05-2013, 12:03 PM
#19
Le Mans Master
have any pictures on an atomic orange (base, ideally)
06-05-2013, 12:49 PM
#20
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
Sorry, no AO pics yet
Here are the current customer pics we have
http://www.customcorvetteaccessories...hpictures.html
Peace
Chip
Here are the current customer pics we have
http://www.customcorvetteaccessories...hpictures.html
Peace
Chip