bars and bushings
Melting Slicks
Joined: Aug 2006
Posts: 2,167
Likes: 11
From: Powell TN
Cruise-In VIII Veteran
Z51
The front swaybar is the same for both the Z51 and the Z06. The rear is slightly smaller for the Z51 due to the lack of tire size in the rear vs the Z06. It is a huge improvement over the base swaybars.
The front swaybar is the same for both the Z51 and the Z06. The rear is slightly smaller for the Z51 due to the lack of tire size in the rear vs the Z06. It is a huge improvement over the base swaybars.
Racer
Joined: Jan 2004
Posts: 255
Likes: 41
From: Lake Charles LA
Most definitely also install the poly - bushings. They reduce deflection to a minimum and help the car get the most from the stiffer stabilizer bars. Be sure to put as much of the supplied (from Pfadt) grease as you can or they will squeak. A set of Pfadt bushings is quite reasonable.
