HUD G-Force Maximum Value
Thread Starter
6th Gear
Joined: Jun 2010
Posts: 6
Likes: 0
HUD G-Force Maximum Value
My 2010 Manual states that:
While in Track Mode the maximum G value acheived during the current ignition cycle can be displayed by pressing and holding the page button. The maximum G value will over write the instantaneous one until the page button is released.
However, when I try this it only advances the page one sequence like it would for a simple press and release.
Does anyone know how to work it?
While in Track Mode the maximum G value acheived during the current ignition cycle can be displayed by pressing and holding the page button. The maximum G value will over write the instantaneous one until the page button is released.
However, when I try this it only advances the page one sequence like it would for a simple press and release.
Does anyone know how to work it?
Race Director
Joined: May 2008
Posts: 10,742
Likes: 629
From: Manheim Pennsylvania
Hold the page button in for longer than you think is necessary. Do not pay any attention to the page sequence when you push the button in. The information will display. Do not shut down the engine as all information will be lost. It took a few tries before I got the recall function to display. I didn't hold the button in long enough, seems like it takes forever.
